Compensated vs. fully compensated
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
-
- Posts: 107
- Joined: Fri Aug 14, 2020 10:28 am
- Location: Tewkbury, NJ, USA
- Has thanked: 0
- Been thanked: 15 times
Compensated vs. fully compensated
There is currently a classified ad that describes a certain tuba as being "fully compensated." Is there a difference between a compensated tuba and a fully compensated tuba?
Hup
Hup
Yes, I play tuba. What else is there to say?
-
- Posts: 108
- Joined: Sat Aug 22, 2020 10:11 am
- Has thanked: 34 times
- Been thanked: 25 times
- bloke
- Mid South Music
- Posts: 19285
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3841 times
- Been thanked: 4086 times
Re: Compensated vs. fully compensated
The use of the word, “fully“ means nothing technically - that I know of.
Someone could make up or invent a technical use of that word, such as “compensating loops vs. - simply - four valves“ or “four valve compensating vs. three valve compensating“ but neither of those definitions are currently down in the books.
When I sell compensating instruments, I enjoy being fully compensated.
Someone could make up or invent a technical use of that word, such as “compensating loops vs. - simply - four valves“ or “four valve compensating vs. three valve compensating“ but neither of those definitions are currently down in the books.
When I sell compensating instruments, I enjoy being fully compensated.
- Three Valves
- Posts: 4604
- Joined: Thu Aug 13, 2020 4:07 pm
- Location: The Land of Pleasant Living
- Has thanked: 812 times
- Been thanked: 500 times
Re: Compensated vs. fully compensated
In the 80s everything was, like, "totally" compensated.
Thought Criminal
Mack Brass Artiste
TU422L with TU25
1964 Conn 36k with CB Arnold Jacobs
Accent (By B&S) 952R with Bach12
The Fourth Estate is the Fifth Column
Mack Brass Artiste
TU422L with TU25
1964 Conn 36k with CB Arnold Jacobs
Accent (By B&S) 952R with Bach12
The Fourth Estate is the Fifth Column
-
- Posts: 1342
- Joined: Mon Oct 26, 2020 2:31 pm
- Location: Portugal
- Has thanked: 6 times
- Been thanked: 169 times
Re: Compensated vs. fully compensated
No, in fact the Blaikley compensating systems are only partial. The 3 valve system compensates only for combinations with the 3rd valve, the 4 valve system compensates only for combinations with the 4th valve. So on a compensating Eb tuba, F# and B - 2nd and 3rd valves - would benefit from compensation on a 3 valve system, but not on a 4 valve.
- bloke
- Mid South Music
- Posts: 19285
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3841 times
- Been thanked: 4086 times
Re: Compensated vs. fully compensated
Yes. This has occurred to me as well.donn wrote: ↑Thu Dec 31, 2020 11:03 am No, in fact the Blaikley compensating systems are only partial. The 3 valve system compensates only for combinations with the 3rd valve, the 4 valve system compensates only for combinations with the 4th valve. So on a compensating Eb tuba, F# and B - 2nd and 3rd valves - would benefit from compensation on a 3 valve system, but not on a 4 valve.
My own 3+1 compensating instruments feature longer-than-o.e.m. compensating #3 slides, to partially smooth over this shortcoming in that version of the Blaikley system.
- windshieldbug
- Posts: 500
- Joined: Thu Aug 13, 2020 1:02 pm
- Location: 8 vb
- Has thanked: 325 times
- Been thanked: 90 times
Re: Compensated vs. fully compensated
Even if a system WERE "fully compensating", would that be in Pure, Just or Well-Tempered intonation?
If it’s tourist season, why can’t we shoot them?
- bloke
- Mid South Music
- Posts: 19285
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3841 times
- Been thanked: 4086 times
Re: Compensated vs. fully compensated
windshieldbug wrote: ↑Thu Dec 31, 2020 11:24 am Even if a system WERE "fully compensating", would that be in Pure, Just or Well-Tempered intonation?
I only own extra-loud and brash-sounding tubas, because I prefer to emit mean tones.
- Three Valves
- Posts: 4604
- Joined: Thu Aug 13, 2020 4:07 pm
- Location: The Land of Pleasant Living
- Has thanked: 812 times
- Been thanked: 500 times
Re: Compensated vs. fully compensated
What do we want??
Full compensation!!
When do we want it??
NOW!!
Full compensation!!
When do we want it??
NOW!!
Thought Criminal
Mack Brass Artiste
TU422L with TU25
1964 Conn 36k with CB Arnold Jacobs
Accent (By B&S) 952R with Bach12
The Fourth Estate is the Fifth Column
Mack Brass Artiste
TU422L with TU25
1964 Conn 36k with CB Arnold Jacobs
Accent (By B&S) 952R with Bach12
The Fourth Estate is the Fifth Column
- bloke
- Mid South Music
- Posts: 19285
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3841 times
- Been thanked: 4086 times
- GC
- Posts: 515
- Joined: Thu Aug 13, 2020 2:53 pm
- Location: Rome, GA [Rosedale/Armuchee suburbs]
- Has thanked: 77 times
- Been thanked: 99 times
Re: Compensated vs. fully compensated
Some of us play with Impure, Unjustifiable, and Ill-Tempered intonation.windshieldbug wrote: ↑Thu Dec 31, 2020 11:24 am Even if a system WERE "fully compensating", would that be in Pure, Just or Well-Tempered intonation?
Packer/Sterling JP377 compensating Eb; Mercer & Barker MBUZ5 (Tim Buzbee "Lone ☆ Star" F-tuba mouthpiece), Mercer & Barker MB3; for sale: Conn Monster Eb 1914, Fillmore Bros 1/4 Eb ca. 1905 antique (still plays), Bach 42B trombone
- windshieldbug
- Posts: 500
- Joined: Thu Aug 13, 2020 1:02 pm
- Location: 8 vb
- Has thanked: 325 times
- Been thanked: 90 times
Re: Compensated vs. fully compensated
Last edited by windshieldbug on Sun Jan 03, 2021 10:19 am, edited 2 times in total.
If it’s tourist season, why can’t we shoot them?
- bloke
- Mid South Music
- Posts: 19285
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3841 times
- Been thanked: 4086 times
- bloke
- Mid South Music
- Posts: 19285
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3841 times
- Been thanked: 4086 times
Re: Compensated vs. fully compensated
Full double horns keep the B-flat and F horns’ valve circuits completely separate.
Compensating double horns feature all the same fingerings, but add enough to the B-flat horns’ circuits to accomplish the F horn circuits...
...so, when playing F horn pitches with valves depressed, a player is blowing through both circuits activated by any of those valves.
Compensating double horns tend to weigh less, because they feature a bit less tubing, but they also have a (general...and I’m sure this varies by make) reputation for playing stuffy on the F side, as well as out-of-tune on the F side.
I’m not-at-all attempting to educate/school/inform the person who posted before me, but there might be a few people who have never heard about “compensating double“ French horns (as they have become more and more uncommon, over the years)…thus the explanation.
As a comparison, I am fairly certain that I remember that Tommy Johnson’s Yamaha tuba - which was converted from an F tuba to a double F/C tuba – used a “compensating double“ system, and not a “full double“ system...
...and - though they are almost never thought of in this way (nor all-that-much used in this way, with the F “side“ nearly completely reserved for low pitches) - four valve compensating euphoniums are actually “compensating double“ B-flat/F euphoniums.
Compensating double horns feature all the same fingerings, but add enough to the B-flat horns’ circuits to accomplish the F horn circuits...
...so, when playing F horn pitches with valves depressed, a player is blowing through both circuits activated by any of those valves.
Compensating double horns tend to weigh less, because they feature a bit less tubing, but they also have a (general...and I’m sure this varies by make) reputation for playing stuffy on the F side, as well as out-of-tune on the F side.
I’m not-at-all attempting to educate/school/inform the person who posted before me, but there might be a few people who have never heard about “compensating double“ French horns (as they have become more and more uncommon, over the years)…thus the explanation.
As a comparison, I am fairly certain that I remember that Tommy Johnson’s Yamaha tuba - which was converted from an F tuba to a double F/C tuba – used a “compensating double“ system, and not a “full double“ system...
...and - though they are almost never thought of in this way (nor all-that-much used in this way, with the F “side“ nearly completely reserved for low pitches) - four valve compensating euphoniums are actually “compensating double“ B-flat/F euphoniums.
- iiipopes
- Posts: 1054
- Joined: Thu Aug 13, 2020 4:26 pm
- Has thanked: 138 times
- Been thanked: 187 times
Re: Compensated vs. fully compensated
Hmmm. In the french horn context, I always thought a "compensating" french horn was a single horn with a 4th valve to help the low range, much as a 5-valve tuba has either the 2+3 or long-whole-tone 5th valve setup to help with the low range. Hmmm.
Jupiter JTU1110 - K&G 3F
"Real" Conn 36K - JK 4B Classic
"Real" Conn 36K - JK 4B Classic