Soft metal - pic added
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
Soft metal - pic added
I have an old Grand Rapids Eb, a York stencil. The metal is thin like many Yorks, but some spots are super soft. I could likely dent it by squeezing it, or pushing hard with one finger. Is there a way, short of a patch, to reinforce these really soft spots? Why do I see blue pill jokes in the answers?
Last edited by Stryk on Wed Jan 06, 2021 9:12 pm, edited 1 time in total.
Terry Stryker
Mirafone 186C, 186BBb, 184C, 186C clone
Gebr. Alexander New 163C, Vintage 163C, Vintage 163BBb
Amati 481C
Lyon & Healy 6/4
Kane Stealth tuba
A plethora of others....
Mirafone 186C, 186BBb, 184C, 186C clone
Gebr. Alexander New 163C, Vintage 163C, Vintage 163BBb
Amati 481C
Lyon & Healy 6/4
Kane Stealth tuba
A plethora of others....
-
bloke
- Mid South Music
- Posts: 19441
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3888 times
- Been thanked: 4149 times
Re: Soft metal
About the only thing that can be done would be to remove the thin bow(s), solder pieces of brass sheet metal over each end, blob lead solder all over the exterior insertion areas on each end, send it to Anderson...
...and have them copper plate it like copper plating was going out of style.
Once you got it back, you could remove the soldered-on sheet metal from each end (which prevented the interior from being copper plated, and heat-and-remove the blobbed-on lead solder from each end (as the copper plating over the solder will also go away, the ends will still fit inside their respective ferrules).
If the instrument is silver or worn silver, you can have those copper-built-up bows silver plated to hide the copper.
I'd rate the typical thickness of never-refinished York tuba sheet brass to be (no...not "thick", but) "average".
The reason the CSO York is lightweight, is because it has had the guts buffed out of it (by some hack, in my estimation). Old pictures show that it originally sported a satin silver finish. It takes a whole bunch of removal of material to accomplish a smooth bright finish on a formerly-satin-finish instrument.
...and have them copper plate it like copper plating was going out of style.
Once you got it back, you could remove the soldered-on sheet metal from each end (which prevented the interior from being copper plated, and heat-and-remove the blobbed-on lead solder from each end (as the copper plating over the solder will also go away, the ends will still fit inside their respective ferrules).
If the instrument is silver or worn silver, you can have those copper-built-up bows silver plated to hide the copper.
I'd rate the typical thickness of never-refinished York tuba sheet brass to be (no...not "thick", but) "average".
The reason the CSO York is lightweight, is because it has had the guts buffed out of it (by some hack, in my estimation). Old pictures show that it originally sported a satin silver finish. It takes a whole bunch of removal of material to accomplish a smooth bright finish on a formerly-satin-finish instrument.
Re: Soft metal
Interesting. I *KNOW* this old horn is not worth that. It will remain a "wall hanger"!
Terry Stryker
Mirafone 186C, 186BBb, 184C, 186C clone
Gebr. Alexander New 163C, Vintage 163C, Vintage 163BBb
Amati 481C
Lyon & Healy 6/4
Kane Stealth tuba
A plethora of others....
Mirafone 186C, 186BBb, 184C, 186C clone
Gebr. Alexander New 163C, Vintage 163C, Vintage 163BBb
Amati 481C
Lyon & Healy 6/4
Kane Stealth tuba
A plethora of others....
-
bloke
- Mid South Music
- Posts: 19441
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3888 times
- Been thanked: 4149 times
-
Mark E. Chachich
- Posts: 131
- Joined: Fri Aug 14, 2020 9:32 am
- Location: Maryland
- Has thanked: 276 times
- Been thanked: 39 times
Re: Soft metal
I have an old York Monster E flat (I think 1920s), the metal is rather thick. I think that because the previous owners most likely did not buff it into thin metal it is more like the original York tubas.
Best,
mark
Best,
mark
Life Member Baltimore Musician's Union Local 40-543
Life Member International Tuba Euphonium Association (ITEA)
Ph.D. Experimental Psychology, Behavioral Neuroscience (a musician can do almost anything!)
Life Member International Tuba Euphonium Association (ITEA)
Ph.D. Experimental Psychology, Behavioral Neuroscience (a musician can do almost anything!)
Re: Soft metal
Terry Stryker
Mirafone 186C, 186BBb, 184C, 186C clone
Gebr. Alexander New 163C, Vintage 163C, Vintage 163BBb
Amati 481C
Lyon & Healy 6/4
Kane Stealth tuba
A plethora of others....
Mirafone 186C, 186BBb, 184C, 186C clone
Gebr. Alexander New 163C, Vintage 163C, Vintage 163BBb
Amati 481C
Lyon & Healy 6/4
Kane Stealth tuba
A plethora of others....
-
bloke
- Mid South Music
- Posts: 19441
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3888 times
- Been thanked: 4149 times