...YET: he wanted UPRIGHT bells (of course
![Eyes :eyes:](./images/smilies/e21531.gif)
...so we struck a deal, and the formerly WORST (and the nicest) two of the three (that we have) will be fixed up, and leave nice open spots in my storage.
...even better, those spots empty spots will represent (well...a tiny bit...not very much) MONEY.
![Smilie7 :smilie7:](./images/smilies/e21579.gif)
Again, I pulled the WORST and the EASIEST (of the three that I have) to sell to him. I figured that - if I fixed up the WORST one - it would be GONE, and the EASIEST would make up for the time that the WORST one took to fix...
...and this (again) is the WORST...but NEITHER had upright bells...so here is what I'm going to supply him with upright bells (because I'm NOT-NOT-NOT pulling the upright bells from the 2341 (FOUR valve) versions that are sitting here awaiting restorations (for obvious reasons).
In order to fabricate UPRIGHT King bells from King formerly-recording bells, I'm using portions of the "stack/chimney" portions of two hopelessly-trashed (cracks and holes) vintage Miraphone 186 bells.
I may not place the pictures in the ideal order, and (again) today I (not only) WORKED my @$$ off, but (also) I HURRIED my @$$ up (because this stuff ain't "fun", and it just needs to GET DONE)...so (per usual) no "during" pictures.
WHEN THIS INSTRUMENT IS COMPLETELY DONE, I'LL POST ONE OR TWO MORE PICTURES...
I guess I'll show the FRANKEN-BELL first...
![Image](https://i.imgur.com/aRbElyl.jpg)
![Image](https://i.imgur.com/djnphXS.jpg)
![Image](https://i.imgur.com/B1Sq4DT.jpg)
![Image](https://i.imgur.com/lydBZKt.jpg)
![Image](https://i.imgur.com/zGEWouC.jpg)
![Image](https://i.imgur.com/HFd2TUq.jpg)
![Image](https://i.imgur.com/0JpJxpJ.jpg)
YEAH...I HAD TO PULL ~BOTH~ LOWER BOWS (' certainly didn't want to...)
TO PROPERLY REPAIR THIS TUBA BODY.
![Image](https://i.imgur.com/fF0eFSw.jpg)
![Image](https://i.imgur.com/AFEDFR0.jpg)