Your Horn Haulers!?
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
- jonesbrass
- Posts: 186
- Joined: Tue Aug 25, 2020 6:20 am
- Has thanked: 65 times
- Been thanked: 27 times
Re: Your Horn Haulers!?
Sent from my iPad using Tapatalk
Willson 3050S CC, Willson 3200S F, B&S PT-10, BMB 6/4 CC, Yamaclone JFF-303
- Schlepporello
- Posts: 539
- Joined: Wed Aug 12, 2020 11:12 pm
- Location: Amarillo, Texas
- Has thanked: 11 times
- Been thanked: 15 times
Re: Your Horn Haulers!?
The late Charlie Krause had a Goldwing that he strapped his 1291 to. As small as he was, I would have thought twice about doing such a thing.
TubaForum.net Friendly Neighborhood Moderator
There are three things that I can never remember.
1)...................?
OK, make that four.
There are three things that I can never remember.
1)...................?
OK, make that four.
- bloke
- Mid South Music
- Posts: 19285
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3841 times
- Been thanked: 4086 times
Re: Your Horn Haulers!?
Having owned some serious bicycles (and still have a couple of "serious" ones...including a vintage original-paint Coppi - outfitted with Campagnolo components),
I've always been interested in motorcycles...but EVERY SINGLE ONE of my friends - who've had them - were all SERIOUSLY hurt (always: the fault of other motorists) on theirs.
One time - on the way to Sewanee Summer Music Festival, to drop one of my kids off there for those weeks - a group of weekend cyclists passed us on that winding mountain road - which leads to the campus. I told Mrs. bloke, "We'll end up passing them in a mile or two; they're going way too fast, and one of them is going to end up up in one of those trees or a hundred feet down that ravine." ...It was the former, luckily (probably) for the too-fast cyclist.
Even the previous owners of blokeplace spun out on their his/hers Harley's on the private road into this place...which prompted them to pave it.
I've always been interested in motorcycles...but EVERY SINGLE ONE of my friends - who've had them - were all SERIOUSLY hurt (always: the fault of other motorists) on theirs.
One time - on the way to Sewanee Summer Music Festival, to drop one of my kids off there for those weeks - a group of weekend cyclists passed us on that winding mountain road - which leads to the campus. I told Mrs. bloke, "We'll end up passing them in a mile or two; they're going way too fast, and one of them is going to end up up in one of those trees or a hundred feet down that ravine." ...It was the former, luckily (probably) for the too-fast cyclist.
Even the previous owners of blokeplace spun out on their his/hers Harley's on the private road into this place...which prompted them to pave it.
- jonesbrass
- Posts: 186
- Joined: Tue Aug 25, 2020 6:20 am
- Has thanked: 65 times
- Been thanked: 27 times
Your Horn Haulers!?
Thank the Lord I’ve never made an involuntary dismount from any of my motorcycles. I don’t always transport tubas by cycle, either. My other ride is a Nissan Frontier Crew Cab. It’s just not as fun as my Harley.bloke wrote:Having owned some serious bicycles (and still have a couple of "serious" ones...including a vintage original-paint Coppi - outfitted with Campagnolo components),
I've always been interested in motorcycles...but EVERY SINGLE ONE of my friends - who've had them - were all SERIOUSLY hurt (always: the fault of other motorists) on theirs.
One time - on the way to Sewanee Summer Music Festival, to drop one of my kids off there for those weeks - a group of weekend cyclists passed us on that winding mountain road - which leads to the campus. I told Mrs. bloke, "We'll end up passing them in a mile or two; they're going way too fast, and one of them is going to end up up in one of those trees or a hundred feet down that ravine." ...It was the former, luckily (probably) for the too-fast cyclist.
Even the previous owners of blokeplace spun out on their his/hers Harley's on the private road into this place...which prompted them to pave it.
Sent from my iPad using Tapatalk
Willson 3050S CC, Willson 3200S F, B&S PT-10, BMB 6/4 CC, Yamaclone JFF-303
-
- Posts: 87
- Joined: Thu Aug 13, 2020 11:11 am
- Has thanked: 0
- Been thanked: 11 times
Re: Your Horn Haulers!?
I've been meaning to post this for ages: now that I've got imgur working, here goes.
I needed a safe, secure way to get my 1241 to and from rehearsals etc. so got a heap of 3/4in marine ply
3"x1 1/2" pine hinges glue, silicon sealer and about 300 screws and came up with a strong box to mount on the 92 Toyota Hilux. 2 support points are used: the bell to bottom bow joints and the top of the upper bow. High density foam pads those points and straps hold everything firmly in place. I can even carry my seat, brief case and music stand and a gig bag inside. The folding, drop down door is weatherproof and has a staple and hasp for the padlock. No dents are able to attack the King when in this case.
I needed a safe, secure way to get my 1241 to and from rehearsals etc. so got a heap of 3/4in marine ply
3"x1 1/2" pine hinges glue, silicon sealer and about 300 screws and came up with a strong box to mount on the 92 Toyota Hilux. 2 support points are used: the bell to bottom bow joints and the top of the upper bow. High density foam pads those points and straps hold everything firmly in place. I can even carry my seat, brief case and music stand and a gig bag inside. The folding, drop down door is weatherproof and has a staple and hasp for the padlock. No dents are able to attack the King when in this case.
-
- Posts: 1045
- Joined: Thu Aug 13, 2020 8:41 am
- Has thanked: 41 times
- Been thanked: 80 times
Re: Your Horn Haulers!?
Unless you have to hit the brakes really hard..yikes.ken herrick wrote: ↑Sat Mar 06, 2021 11:12 pm I've been meaning to post this for ages: now that I've got imgur working, here goes.
I needed a safe, secure way to get my 1241 to and from rehearsals etc. so got a heap of 3/4in marine ply
3"x1 1/2" pine hinges glue, silicon sealer and about 300 screws and came up with a strong box to mount on the 92 Toyota Hilux. 2 support points are used: the bell to bottom bow joints and the top of the upper bow. High density foam pads those points and straps hold everything firmly in place. I can even carry my seat, brief case and music stand and a gig bag inside. The folding, drop down door is weatherproof and has a staple and hasp for the padlock. No dents are able to attack the King when in this case.
06' Miraphone 187-4U
-
- Posts: 87
- Joined: Thu Aug 13, 2020 11:11 am
- Has thanked: 0
- Been thanked: 11 times
Re: Your Horn Haulers!?
"Unless you have to hit the brakes really hard..yikes."
That did happen a few times but with the tuba being securely strapped down it did not move. A head on wouldn't have done any damage unless the bolts holding the whole thing down to the tray sheared (unlikely) and even rolling it would have stood a fair chance of the tuba surviving. This thing was built for rough roads and probably pretty well "over engineered".
That did happen a few times but with the tuba being securely strapped down it did not move. A head on wouldn't have done any damage unless the bolts holding the whole thing down to the tray sheared (unlikely) and even rolling it would have stood a fair chance of the tuba surviving. This thing was built for rough roads and probably pretty well "over engineered".
-
- Posts: 8
- Joined: Tue Aug 18, 2020 9:26 am
- Has thanked: 0
- Been thanked: 1 time
-
- Posts: 1342
- Joined: Mon Oct 26, 2020 2:31 pm
- Location: Portugal
- Has thanked: 6 times
- Been thanked: 169 times
Re: Your Horn Haulers!?
The motorcycle is gone, the tuba is gone, but seems this photo is called for again:
- bloke
- Mid South Music
- Posts: 19285
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3841 times
- Been thanked: 4086 times
Re: Your Horn Haulers!?
My small engine guy (from weedeaters to 4-wheelers) has a couple of BEAUTIFUL (no engines mounted on them) "mopeds" in his shop.
He didn't know how much the motors cost, but he told me they were so pretty (condition, including paint) and so inexpensive that he decided to go ahead and buy them.
With green cities causing urban traffic congestion (cars idling, and moving at lower speeds, etc.) by removing traffic lanes and creating "bike lanes" (which are always empty - at least: in Memphis) I wonder (??) if they allow mopeds (hybrid bicycles, which can be pedaled or motor-powered) in the bike lanes...
Those two were some hefty-looking bikes...I'm sure they would easily support my 220 lbs. + a 23 lb. tuba + a 7 lb. bag (a mere .125 ton ).
Also...for some of these gigs in Memphis (where I might be a bit reluctant to leave my car outside), I could park in a better area, and bike the rest of the way...
Thinking further...Most of my tubas are worth more than most of my cars, so...
He didn't know how much the motors cost, but he told me they were so pretty (condition, including paint) and so inexpensive that he decided to go ahead and buy them.
With green cities causing urban traffic congestion (cars idling, and moving at lower speeds, etc.) by removing traffic lanes and creating "bike lanes" (which are always empty - at least: in Memphis) I wonder (??) if they allow mopeds (hybrid bicycles, which can be pedaled or motor-powered) in the bike lanes...
Those two were some hefty-looking bikes...I'm sure they would easily support my 220 lbs. + a 23 lb. tuba + a 7 lb. bag (a mere .125 ton ).
Also...for some of these gigs in Memphis (where I might be a bit reluctant to leave my car outside), I could park in a better area, and bike the rest of the way...
Thinking further...Most of my tubas are worth more than most of my cars, so...
-
- Posts: 1342
- Joined: Mon Oct 26, 2020 2:31 pm
- Location: Portugal
- Has thanked: 6 times
- Been thanked: 169 times
Re: Your Horn Haulers!?
One of my bicycles has a motor, albeit electric. A couple HP - arguably above the legal 1HP standard in my state, but not radically different from the higher power end of the consumer stuff, and the difference is sure not discernible. There's no problem with that in a bicycle lane. A gas powered motorbike of any kind, though, is not likely to be viewed favorably.
But the thing about the motorcycle pictured above that makes it suitable for hauling a tuba is not so much the powerful motor, it's the size of the luggage rack. Like the Nihola in Snakecharmer's post, or it seems to me we've seen a 2-wheel front loader from that part of the world in a previous iteration of this story. I've carried my sousaphone in a bicycle trailer. Just like the car, the only issue is whether it will fit the cargo area.
But the thing about the motorcycle pictured above that makes it suitable for hauling a tuba is not so much the powerful motor, it's the size of the luggage rack. Like the Nihola in Snakecharmer's post, or it seems to me we've seen a 2-wheel front loader from that part of the world in a previous iteration of this story. I've carried my sousaphone in a bicycle trailer. Just like the car, the only issue is whether it will fit the cargo area.
Re: Your Horn Haulers!?
We put >3,000 miles on a brand-new Geo Prizm rental in 1991 on a big loop through Nevada, Utah, Arizona, and California. Long stretches of empty Nevada highway taught us that the front end gets really light at ~105 mph (speedometer max'd out at 100, iirc). My wife (then girl friend) earned two tickets in Arizona. Friendly advice: don't pass over a double-yellow at 85 mph in front of an oncoming Gila County LEO. You wouldn't believe how fast they can whip their SUVs through a high-speed U-Turn while flipping on the lights and sirens ;-)
Was great to be young and free.
- iiipopes
- Posts: 1054
- Joined: Thu Aug 13, 2020 4:26 pm
- Has thanked: 138 times
- Been thanked: 187 times
Re: Your Horn Haulers!?
Welcome my son, welcome to the machine.
Where have you been? It's alright we know where you've been.
You've been in the pipeline, filling in time,
provided with toys and Scouting for Boys.
You bought a guitar to punish your ma,
And you didn't like school, and you know you're nobody's fool,
So welcome to the machine.
Welcome my son, welcome to the machine.
What did you dream? It's alright we told you what to dream.
You dreamed of a big star, he played a mean guitar,
He always ate in the Steak Bar. He loved to drive in his Jaguar.
So welcome to the machine.
Where have you been? It's alright we know where you've been.
You've been in the pipeline, filling in time,
provided with toys and Scouting for Boys.
You bought a guitar to punish your ma,
And you didn't like school, and you know you're nobody's fool,
So welcome to the machine.
Welcome my son, welcome to the machine.
What did you dream? It's alright we told you what to dream.
You dreamed of a big star, he played a mean guitar,
He always ate in the Steak Bar. He loved to drive in his Jaguar.
So welcome to the machine.
Jupiter JTU1110 - K&G 3F
"Real" Conn 36K - JK 4B Classic
"Real" Conn 36K - JK 4B Classic
- Mary Ann
- Posts: 3026
- Joined: Thu Aug 13, 2020 9:24 am
- Has thanked: 517 times
- Been thanked: 598 times
Re: Your Horn Haulers!?
Just kidding. Tuba car is my stick shift 2005 Forester; both the 184 and the NStar fit nicely in the back. This is my truck etc that I took a big trip in in 2016. I got a few looks from various people at little old 67 year old me driving that thing. It was damn fun.
- Attachments
-
- truck camplite.jpg (185.47 KiB) Viewed 1236 times
- These users thanked the author Mary Ann for the post:
- sdloveless (Fri Mar 12, 2021 7:17 pm)