A sort of "copy" of one or our mouthpieces has been floating around for years. Aside from the shell shape, these are or very poor quality both in musical qualities, finish and plating. "You get what you pay for" does not apply here; what we have seen is very poor.
Our mouthpieces, RT for the United States and PT for Europe, Middle and South America, the Far East and Australia, are manufactued at our factory here in Germany under my close personal supervision.
The best mouthpiece is the one the player enjoys using, the one that provides the most benefits...
We are living in a challenging times. Look before you leap!
Bob Tucci
Chinese mouthpieces
Moderator: Retail Partner
-
Robert Tucci
- RT Mouthpieces
- Posts: 17
- Joined: Mon Aug 17, 2020 9:31 am
- Has thanked: 0
- Been thanked: 13 times
Chinese mouthpieces
- Attachments
-
- RT-MP -Res800.jpg (67.08 KiB) Viewed 937 times
- These users thanked the author Robert Tucci for the post (total 2):
- Lch3 (Mon Mar 22, 2021 7:10 am) • the elephant (Mon Mar 22, 2021 8:12 pm)
-
Three Valves
- Posts: 4604
- Joined: Thu Aug 13, 2020 4:07 pm
- Location: The Land of Pleasant Living
- Has thanked: 812 times
- Been thanked: 500 times
Re: Chinese tuba mouthpieces
Your stuff is great and for $99US a great deal too!!Robert Tucci wrote: ↑Mon Mar 22, 2021 6:09 am A sort of "copy" of one or our mouthpieces has been floating around for years. Aside from the shell shape, these are or very poor quality both in musical qualities, finish and plating. "You get what you pay for" does not apply here; what we have seen is very poor.
Bob Tucci
Only problem now is that most/all of the line up for BB/CC tubas are 33mm+ and some of us find that to be just a little too large. Most are also Euro shank.
bloke said the quality of this knock off was not the greatest, that's why he has had it re-plated.
Last edited by Three Valves on Mon Mar 22, 2021 7:27 am, edited 1 time in total.
Thought Criminal
Mack Brass Artiste
TU422L with TU25
1964 Conn 36k with CB Arnold Jacobs
Accent (By B&S) 952R with Bach12
The Fourth Estate is the Fifth Column
Mack Brass Artiste
TU422L with TU25
1964 Conn 36k with CB Arnold Jacobs
Accent (By B&S) 952R with Bach12
The Fourth Estate is the Fifth Column
-
Three Valves
- Posts: 4604
- Joined: Thu Aug 13, 2020 4:07 pm
- Location: The Land of Pleasant Living
- Has thanked: 812 times
- Been thanked: 500 times
Re: Chinese tuba mouthpieces
dupe 
Thought Criminal
Mack Brass Artiste
TU422L with TU25
1964 Conn 36k with CB Arnold Jacobs
Accent (By B&S) 952R with Bach12
The Fourth Estate is the Fifth Column
Mack Brass Artiste
TU422L with TU25
1964 Conn 36k with CB Arnold Jacobs
Accent (By B&S) 952R with Bach12
The Fourth Estate is the Fifth Column
-
bloke
- Mid South Music
- Posts: 19285
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3841 times
- Been thanked: 4086 times
-
Robert Tucci
- RT Mouthpieces
- Posts: 17
- Joined: Mon Aug 17, 2020 9:31 am
- Has thanked: 0
- Been thanked: 13 times
RT and PT Shank dimensions
Dear Three Valves,
Many thanks for the flowers.. From experience, models such as the RT-50 and RT-88 work better with a large shank. We do have all models with both large and small shanks as available under the PT brand. These can be supplied as required. The Canadian Brass Heritage Series which we manufacture is entirely S shank. We do have the Arnold Jacobs model in both large and small shank. Other than that, we make the revised RT-64 with both large and small shanks. The Sousapower models, both the SP-3 and the SP-4, have small shanks. There is one exception in the entire parade, the RT/PT-48. This has an intermediate size shank and as above, because it works better that way.
In time we can provide most of the RT models with both shank sizes.
A further comment on the CCC (Cheap Chinese Copy), tubas are long and mouthpieces are short: putting these together and coming up with good results requries much experience.
We soldier on here, waiting for schools to reopen, bands able to once again perform and our concert venues to reopen.
Bob Tucci
Many thanks for the flowers.. From experience, models such as the RT-50 and RT-88 work better with a large shank. We do have all models with both large and small shanks as available under the PT brand. These can be supplied as required. The Canadian Brass Heritage Series which we manufacture is entirely S shank. We do have the Arnold Jacobs model in both large and small shank. Other than that, we make the revised RT-64 with both large and small shanks. The Sousapower models, both the SP-3 and the SP-4, have small shanks. There is one exception in the entire parade, the RT/PT-48. This has an intermediate size shank and as above, because it works better that way.
In time we can provide most of the RT models with both shank sizes.
A further comment on the CCC (Cheap Chinese Copy), tubas are long and mouthpieces are short: putting these together and coming up with good results requries much experience.
We soldier on here, waiting for schools to reopen, bands able to once again perform and our concert venues to reopen.
Bob Tucci
- These users thanked the author Robert Tucci for the post (total 5):
- Three Valves (Mon Mar 22, 2021 10:50 am) • the elephant (Mon Mar 22, 2021 8:14 pm) • BopEuph (Tue Mar 23, 2021 6:06 am) • bort2.0 (Tue Mar 23, 2021 10:29 am) • Billy M. (Wed Mar 24, 2021 8:36 pm)
-
barry grrr-ero
- Posts: 53
- Joined: Tue Aug 25, 2020 5:29 pm
- Has thanked: 0
- Been thanked: 4 times
Re: Chinese mouthpieces
I love my RT-50+. It's the one I use when I want to rattle the room, but still keep a fairly dark sound. Mr. Tucci clearly understand the B&S line of tubas, which has been a real help to me.
Barry Guerrero
Barry Guerrero