York 3v Eb

[Doc]

I didn't see this posted anywhere yet. Anyone familiar with this tuba?

Vintage York 3v Eb Tuba

York 3v 5.png (152.55 KiB) Viewed 671 times

[humBell]

I believe this is it?

viewtopic.php?f=21&t=2333

[Doc]

I believe this is it?

viewtopic.php?f=21&t=2333

Thanks! I knew I had seen it before, but didn't think it was here. Optimistic price for sure. I'd like to have one, but not in that price range.
@York-aholic
@Yorkboy

[York-aholic]

A friend has one in the same configuration that has had a 4th added at some point and it plays great. The 2 front action ones (top action ones as well) that I’ve owned have had a great sound, loose all kinds of focus on B, Bb, and A below the staff and had some intonation quicks (to varying degrees).

If this one plays more like my friends horn and less like the 2 I owned...

[Doc]

A friend has one in the same configuration that has had a 4th added at some point and it plays great. The 2 front action ones (top action ones as well) have a great sound, loose all kinds of focus on B, Bb, and A below the staff and had some intonation quicks (to varying degrees).

If this one plays more like my friends horn and less like the 2 I owned...

Correct me if I'm out of my lane, but at this price, it should already have a 4th valve and play great...?

[York-aholic]

A friend has one in the same configuration that has had a 4th added at some point and it plays great. The 2 front action ones (top action ones as well) have a great sound, loose all kinds of focus on B, Bb, and A below the staff and had some intonation quicks (to varying degrees).

If this one plays more like my friends horn and less like the 2 I owned...

Correct me if I'm out of my lane, but at this price, it should already have a 4th valve and play great...?

Beats me. Horns are worth what the market will bear. I bought one in fabulous shape (lacquered, 3v front action) from Robb Stewart for $900 about 16-17 years ago. Sold it for the same after about 3 years.

Bought a rough silver one with shot valves and crushed MTS for about $500 about 10 years ago. That got traded in as part of a rather large repair bill on another tuba.

[hrender]

Beats me. Horns are worth what the market will bear.

THIS.

[Doc]

The BIN price said $1000.
The price in the description said $2500 obo.
@York-aholic said Horns are worth what the market will bear.
Doc said

BB41676B-756F-4029-A1B9-D7899F372784.jpeg (81.01 KiB) Viewed 572 times

[Yorkboy]

I believe this is it?

viewtopic.php?f=21&t=2333

Thanks! I knew I had seen it before, but didn't think it was here. Optimistic price for sure. I'd like to have one, but not in that price range.
@York-aholic
@Yorkboy

Thanks for the tag, Doc - you’re a daisy if you do!

It’s got the patented high/low pitch doughnut, so it would be similar to converting a top action horn, even though it is already side-action (length will need to be added somewhere to avoid a main tuning slide that hits the chair when pulled out). With that said, $1000 is a little above what I would pay, but it’s certainly a good candidate for the laboratory - I’ve got a 4 valve set already tubed in E flat that would fit perfectly……..

B0764CDC-A5DB-4C4C-B443-97FB4F9B50F3.jpeg (62.85 KiB) Viewed 549 times

[Doc]

Thanks for the tag, Doc - you’re a daisy if you do!

It’s got the patented high/low pitch doughnut, so it would be similar to converting a top action horn, even though it is already side-action (length will need to be added somewhere to avoid a main tuning slide that hits the chair when pulled out). With that said, $1000 is a little above what I would pay, but it’s certainly a good candidate for the laboratory -
I’ve got a 4 valve set already tubed in E flat that would fit perfectly……..

You’re killing me, smalls!

[humBell]

viewtopic.php?f=21&t=594

Is also still up for grabs and has slowly gone down in asking price a little.

[Doc]

How about this? Anyone???

viewtopic.php?f=6&t=2710

[LargeTuba]

viewtopic.php?f=21&t=594

Is also still up for grabs and has slowly gone down in asking price a little.

Needs a lot of work, a new lead-pipe, and valves are of unknown quality.

[humBell]

viewtopic.php?f=21&t=594

Is also still up for grabs and has slowly gone down in asking price a little.

Needs a lot of work, a new lead-pipe, and valves are of unknown quality.

True.
But if @Yorkboy already has a 4 valve ready, valve quality isn't such an issue, and maybe there already is a lead-pipe attached to it? Which would have to be done anyway if his are front action. And yeah, i'm sure there is more to changing a top action body to accommodate front action valves than just putting the valves on the other side, but well... is it worth considering?

[LargeTuba]

Correct me if I'm wrong, but I thought YorkBoy already made a 5 valve version of this tuba with the tall bell version. I also know of a guy who has a rusk cut F one of these. A very nice sounding tuba.

[humBell]

Yeah, now i think of it, i am the least qualified to say it might be useful for someone else. I have exhausted my utility* by simply reminding folk it was still up for sale.

Sorry for my unwarranted speculation.






*actually kind of a relief, knowing i have served what purpose i have, done my job, and can relax now!

[donn]

You ought to work up a disclaimer signature, like "not responsible for poor judgement of potential purchaser of this item."

[York-aholic]

Correct me if I'm wrong, but I thought YorkBoy already made a 5 valve version of this tuba with the tall bell version. I also know of a guy who has a rusk cut F one of these. A very nice sounding tuba.

@Yorkboy Did you?

A "tall bell version" of this would be the 18" bell. They aren't truly a tall bell, as the horn is about 33.75", same as the front action 20" bell Monster Eb. However, the bend of the top bow is lower on the horn so it looks like a tall bell (whereas the 700 series is taller than the Model 33). They are really, really uncommon and as far as I can tell from catalogs, only came in top action at a time when Ebs were going out of fashion.

Cameron Brook of the Western Australia Symphony bought one of the 18" bell York Ebs from Mike Johnson who bought it from Dillons. Here is the horn Cameron Brook had redone: http://www.gchorns.com/blog/the-york-ha ... ovable-5th

[humBell]

You ought to work up a disclaimer signature, like "not responsible for poor judgement of potential purchaser of this item."

First two words should suffice...

Thanks!

[Yorkboy]

@Yorkboy Did you?

Yes, I sort of did, some time ago. It actually had a detachable bell - the same length as the 700 series bell, but detachable. I eventually removed that bell and used it on another project that would benefit more from it, and replaced it with a Holton monster E flat bell.

9315E4B7-0F3D-4458-B551-38A2BCE281E3.jpeg (60.19 KiB) Viewed 389 times

1D4F2991-3A55-4816-8C5A-BB69BBCEFBA3.jpeg (79.76 KiB) Viewed 389 times

I actually have, in my stash of parts, a very old York “short” bell with the smaller 18” bell flare…….I’ve been considering trying it on that horn pictured above, just to see what happens.