So What's Wrong With the Conn 2xJ Bugle?

Projects, repair topics, and Frankentubas
User avatar
Doc
Posts: 2470
Joined: Thu Aug 13, 2020 9:48 am
Location: Downtown Browntown
Has thanked: 844 times
Been thanked: 766 times
Contact:

Re: So What's Wrong With the Conn 2xJ Bugle?

Post by Doc »

LargeTuba wrote: Mon May 10, 2021 11:28 am Those cottage cheese valve buttons always gross me out :laugh:
Yep. Not a fan. But I dig that tuba.
the elephant wrote: Mon May 10, 2021 9:56 am I'm not interested in Martins.
If you were, you could find one that (intonation-wise) plays circles around a 2XJ. But that is not the point of this thread.
For some these issues are more like characteristics rather than problems, but some guys hate these horns. Again, what it is about these horns that makes them so popular with some and so unpopular with others.
As a fan and owner, I've always viewed these issues as being characteristics, with some models being better/worse than others. Outside of leaky valves and poor assembly (both seemingly very common), I'm not sure what exactly gives them those inherent characteristics. I've always believed that it was mostly due to the leadpipe design and smushed valve ports. Poor assembly and old, leaky valves just seem to magnify the problem. So... your idea about the bugle being useful when combined with new leadpipe, valves, and bell resonates with me. Seems like it ought to work. Can't be any worse than it already is.
These users thanked the author Doc for the post:
the elephant (Mon May 10, 2021 1:36 pm)


Welcome to Browntown!
Home of the Brown Note!
User avatar
the elephant
Posts: 3362
Joined: Thu Aug 13, 2020 8:39 am
Location: 404 - Not Found
Has thanked: 1886 times
Been thanked: 1325 times

Re: So What's Wrong With the Conn 2xJ Bugle?

Post by the elephant »

the elephant wrote: Mon May 10, 2021 9:56 amI'm not interested in Martins.
Doc wrote: Mon May 10, 2021 1:07 pmIf you were, you could find one that (intonation-wise) plays circles around a 2XJ. But that is not the point of this thread.
Doc wrote: Mon May 10, 2021 1:07 pmCan't be any worse than it already is.
These two are actually very good, even with all the damage.

The valves do not leak and appear to be just about new, meaning that the wimpy kids at that school defaulted to the recording bell, three-banger Kings that the band director kept trying to get me to take off her hands when I grabbed these two 24Js. (The market for a four-valved Conn is better than for a three-valved anything, in my personal experience.) The Kings were a lot newer but featured some shot-to-héll valves, badly bent slides, and crushed body branches. The Conns look pretty scarred up, with awful leadpipes. (Four ferrules each!) The valves were slightly damaged, but were restored to "like new" function after an hour with the Ferree's slugs and mandrels I bought for these valves. (I work on a lot of these short stroke valves, so I bought the tools to make life easier.)
These users thanked the author the elephant for the post:
Doc (Tue May 11, 2021 9:12 am)
Image
tubaing
Posts: 161
Joined: Tue Aug 25, 2020 4:15 pm
Location: Dunkirk, MD
Has thanked: 31 times
Been thanked: 46 times

Re: So What's Wrong With the Conn 2xJ Bugle?

Post by tubaing »

I know this is VERY helpful...

Some time in the past year, I believe I remember someone posting a South American Frankentuba built out a Conn 6/4. I'll have to see if I can find the pics. Looked amazing.
These users thanked the author tubaing for the post:
the elephant (Mon May 10, 2021 3:13 pm)
User avatar
matt g
Posts: 2577
Joined: Thu Aug 13, 2020 10:37 am
Location: Southeastern New England
Has thanked: 263 times
Been thanked: 554 times

Re: So What's Wrong With the Conn 2xJ Bugle?

Post by matt g »

tubaing wrote: Mon May 10, 2021 2:48 pm I know this is VERY helpful...

Some time in the past year, I believe I remember someone posting a South American Frankentuba built out a Conn 6/4. I'll have to see if I can find the pics. Looked amazing.
I just went looking for the same post. It was a gentleman from Brazil. The work looked top notch. I remember it being on Facebook. I couldn’t find it.

@the elephant, Adam Crowe was selling a 20k body with an M&M valve set and a Kanstul bell. It was a BBb horn, but another reference point nonetheless.
Dillon/Walters CC (sold)
Meinl-Weston 2165 (sold)
User avatar
bloke
Mid South Music
Posts: 19205
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3812 times
Been thanked: 4067 times

Re: So What's Wrong With the Conn 2xJ Bugle?

Post by bloke »

Since the goal is liquidation...(no?)
What about just putting them in really good condition (not "restoring" them, and - if sorta shiny - attempting to save whatever's left of the factory epoxy lacquer) - without morphing them into something else, and just selling them for what they are?

It seems as though we're in a dixieland "lull" (as the last two dixieland revivals seem to have been in the 1950's and 1980's), but are there still any (typically: west-coast-located) two-cornet bands that - note-for-note - read those Lu Watters books, and tend to use 6/4 recording basses...??

...so (if "yes"...??) what about (once ready to sell) advertising them on traditional jazz musician sites/fb pages...??

...or what about (if such exist...??) similar Texas/midwestern bands polka/German music sites/pages...??

https://syncopatedtimes.com/news/

https://www.facebook.com/groups/417911128250424

https://www.facebook.com/groups/332687153418787

Image
User avatar
the elephant
Posts: 3362
Joined: Thu Aug 13, 2020 8:39 am
Location: 404 - Not Found
Has thanked: 1886 times
Been thanked: 1325 times

Re: So What's Wrong With the Conn 2xJ Bugle?

Post by the elephant »

bloke wrote: Mon May 10, 2021 6:12 pm… the goal is liquidation...(no?)
Not really. Currently, there is no goal, hence this discussion post.
Image
User avatar
Doc
Posts: 2470
Joined: Thu Aug 13, 2020 9:48 am
Location: Downtown Browntown
Has thanked: 844 times
Been thanked: 766 times
Contact:

Re: So What's Wrong With the Conn 2xJ Bugle?

Post by Doc »

the elephant wrote: Mon May 10, 2021 1:36 pm
These two are actually very good, even with all the damage.
At least you have something decent to work with.
The valves do not leak and appear to be just about new


Those could be of great value to someone who has worn out, leaky valves on their 2XJ.
The Conns look pretty scarred up, with awful leadpipes. (Four ferrules each!)
:bugeyes: :bugeyes: :bugeyes:
Welcome to Browntown!
Home of the Brown Note!
User avatar
LargeTuba
Posts: 777
Joined: Thu Aug 13, 2020 11:08 am
Has thanked: 97 times
Been thanked: 136 times

Re: So What's Wrong With the Conn 2xJ Bugle?

Post by LargeTuba »

I could use some 2xj parts. I'm trying to flip SA valves to front action... But this conversation has led me to believe they are inferior. If the valve works well and has a good seal, why do they get so much hate?
Pt-6P, Holton 345 CC, 45slp
User avatar
matt g
Posts: 2577
Joined: Thu Aug 13, 2020 10:37 am
Location: Southeastern New England
Has thanked: 263 times
Been thanked: 554 times

Re: So What's Wrong With the Conn 2xJ Bugle?

Post by matt g »

LargeTuba wrote: Tue May 11, 2021 11:13 am I could use some 2xj parts. I'm trying to flip SA valves to front action... But this conversation has led me to believe they are inferior. If the valve works well and has a good seal, why do they get so much hate?
Because the bore distortion may cause some acoustical weirdness. The cross-sectional area of the ports is equivalent to the round bore of intended diameter, but acoustically, it’s probably not quite right (determined by the minor axis or something similar).
Dillon/Walters CC (sold)
Meinl-Weston 2165 (sold)
User avatar
bloke
Mid South Music
Posts: 19205
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3812 times
Been thanked: 4067 times

Re: So What's Wrong With the Conn 2xJ Bugle?

Post by bloke »

Wouldn’t it be interesting were there some tiny little E-flat bottom bow in someone’s junk that is a bit smaller than a 2XJ top bow, but lined up geometrically across the span?
...and - perhaps - the chimney portion of the tiny bell would substitute for the straight chunk...(??)
These users thanked the author bloke for the post:
the elephant (Tue May 11, 2021 8:52 pm)
User avatar
bort2.0
Posts: 5250
Joined: Thu Aug 13, 2020 9:13 am
Location: Minneapolis
Has thanked: 336 times
Been thanked: 999 times

Re: So What's Wrong With the Conn 2xJ Bugle?

Post by bort2.0 »

Make it rotary
Cut it to CC
One piece bell
But not too much pancake to the bell

Then I'll be interested. I've always thought the forearm-looking inner branches were pretty cool looking. Even if they make my back sore just looking at them!
User avatar
Mithosphere
Posts: 128
Joined: Thu Aug 13, 2020 1:26 pm
Has thanked: 40 times
Been thanked: 13 times

Re: So What's Wrong With the Conn 2xJ Bugle?

Post by Mithosphere »

That's a lot to read at the moment, but...

There was a guy that cut a 20J to CC - three valves. I think I remember him saying it played the same or better. There's a website that it was on, I had it bookmarked somewhere a few years back, but now I don't know where it is.

http://forums.chisham.com/viewtopic.php?f=2&t=26292

Also, there was a guy down in South America that had slapped a fixed upright bell AND rotary valves on the 2xJ body. I'm sure it's in Klaus' images. I think it was even for sale on eBay at one point.

Anyway, here are some photos:

https://imgur.com/gallery/tFeutBZ
These users thanked the author Mithosphere for the post:
the elephant (Wed May 12, 2021 9:10 pm)
User avatar
matt g
Posts: 2577
Joined: Thu Aug 13, 2020 10:37 am
Location: Southeastern New England
Has thanked: 263 times
Been thanked: 554 times

Re: So What's Wrong With the Conn 2xJ Bugle?

Post by matt g »

Bumping with this photo:

These users thanked the author matt g for the post:
the elephant (Mon May 31, 2021 10:10 pm)
Dillon/Walters CC (sold)
Meinl-Weston 2165 (sold)
User avatar
LargeTuba
Posts: 777
Joined: Thu Aug 13, 2020 11:08 am
Has thanked: 97 times
Been thanked: 136 times

Re: So What's Wrong With the Conn 2xJ Bugle?

Post by LargeTuba »

matt g wrote: Mon May 31, 2021 5:43 pm Bumping with this photo:

He's selling it, and at a good price. His videos also sound great!

I was looking to buy it but I think he said it was pretty unwieldy.
These users thanked the author LargeTuba for the post:
the elephant (Wed Jun 02, 2021 12:30 pm)
Pt-6P, Holton 345 CC, 45slp
User avatar
LargeTuba
Posts: 777
Joined: Thu Aug 13, 2020 11:08 am
Has thanked: 97 times
Been thanked: 136 times

Re: So What's Wrong With the Conn 2xJ Bugle?

Post by LargeTuba »

Kniffen Tuba 2.0

Image
Pt-6P, Holton 345 CC, 45slp
User avatar
GC
Posts: 514
Joined: Thu Aug 13, 2020 2:53 pm
Location: Rome, GA [Rosedale/Armuchee suburbs]
Has thanked: 76 times
Been thanked: 98 times

Re: So What's Wrong With the Conn 2xJ Bugle?

Post by GC »

Now THAT's interesting. I wonder how it plays?
Packer/Sterling JP377 compensating Eb; Mercer & Barker MBUZ5 (Tim Buzbee "Lone ☆ Star" F-tuba mouthpiece), Mercer & Barker MB3; for sale: Conn Monster Eb 1914, Fillmore Bros 1/4 Eb ca. 1905 antique (still plays), Bach 42B trombone
User avatar
the elephant
Posts: 3362
Joined: Thu Aug 13, 2020 8:39 am
Location: 404 - Not Found
Has thanked: 1886 times
Been thanked: 1325 times

Re: So What's Wrong With the Conn 2xJ Bugle?

Post by the elephant »

LargeTuba wrote: Wed Feb 09, 2022 1:50 pm Kniffen Tuba 2.0

Image
I see a set of 2xJ branches with some other piston valve section, or a 3xJ, with what looks to be a 2165 or Holton bell. Any info?
Last edited by the elephant on Wed Feb 09, 2022 2:31 pm, edited 1 time in total.
Image
User avatar
bort2.0
Posts: 5250
Joined: Thu Aug 13, 2020 9:13 am
Location: Minneapolis
Has thanked: 336 times
Been thanked: 999 times

Re: So What's Wrong With the Conn 2xJ Bugle?

Post by bort2.0 »

GC wrote: Wed Feb 09, 2022 2:22 pm Now THAT's interesting. I wonder how it plays?
Without a leadpipe, not at all!
User avatar
LargeTuba
Posts: 777
Joined: Thu Aug 13, 2020 11:08 am
Has thanked: 97 times
Been thanked: 136 times

Re: So What's Wrong With the Conn 2xJ Bugle?

Post by LargeTuba »

the elephant wrote: Wed Feb 09, 2022 2:27 pm
LargeTuba wrote: Wed Feb 09, 2022 1:50 pm Kniffen Tuba 2.0

Image
Is it the same horn? (It was a 36J, I think, with a Miraphone Siegfried bell?) Or is this another 3xJ (or a 2xJ body with different valves?) with a 2165 bell?
Its a 36J with a Fafner bell I think.

Image Before the new bell.

Its Daniel Ridder, so we're basically guaranteed a sound check :teeth:
Pt-6P, Holton 345 CC, 45slp
User avatar
GC
Posts: 514
Joined: Thu Aug 13, 2020 2:53 pm
Location: Rome, GA [Rosedale/Armuchee suburbs]
Has thanked: 76 times
Been thanked: 98 times

Re: So What's Wrong With the Conn 2xJ Bugle?

Post by GC »

bort2.0 wrote: Wed Feb 09, 2022 2:30 pm
GC wrote: Wed Feb 09, 2022 2:22 pm Now THAT's interesting. I wonder how it plays?
Without a leadpipe, not at all!
:bugeyes:

Well. That's embarrassing.

Gives it an awfully clean look, though . . .
Packer/Sterling JP377 compensating Eb; Mercer & Barker MBUZ5 (Tim Buzbee "Lone ☆ Star" F-tuba mouthpiece), Mercer & Barker MB3; for sale: Conn Monster Eb 1914, Fillmore Bros 1/4 Eb ca. 1905 antique (still plays), Bach 42B trombone
Post Reply