York Sousaphone...
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
York Sousaphone...
So, I'm more than likely going to acquire a York sousaphone soon. However, it doesn't happen to have a neck or bits. So I need to know what I'm getting into here. Are there options available from current offerings, or do I need to have something made or source an original? Any help is appreciated. Thanks!
Kalison DS CC
-
York-aholic
- Posts: 1432
- Joined: Thu Aug 13, 2020 10:39 pm
- Location: SoCal
- Has thanked: 1553 times
- Been thanked: 467 times
Re: York Sousaphone...
If it’s a .750 bore York Monster BBb, I don’t suspect anything stock will work as that York model was a bit different in the leadpipe/neck area. Also the stock York bits took a very large mouthpiece taper; larger than Euro. I know Lee Stofer has made a couple of reproductions.
If it’s a smaller .656 bore BBb or an Eb, I have no idea.
I have a lower leadpipe in satin silver for a York Monster sousaphone sitting in a box if anyone needs it.
If it’s a smaller .656 bore BBb or an Eb, I have no idea.
I have a lower leadpipe in satin silver for a York Monster sousaphone sitting in a box if anyone needs it.
Some old Yorks, Martins, and perhaps a King rotary valved CC