Does anyone know if a 1920s Martin sousaphone bell will fit a 1959 Martin Mammoth, to be used as a forward facing bell?
It looks like the sousaphone bell has the same small diameter on the tuba end, and 24” on the business end.
But would it have the correct angle for a forward facing bell?
Thanks
Barry
Martin Mammoth
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
- Kirley
- Posts: 247
- Joined: Sat Aug 22, 2020 8:46 pm
- Location: Oakland, CA
- Has thanked: 91 times
- Been thanked: 58 times
Re: Martin Mammoth
Not positive but most likely the sousaphone bell will shoot out at a 90 degree angle. Whereas a proper recording bell will shoot upwards slightly.
Assuming the bell collars are an actual match, the biggest issue will be visibility.
Assuming the bell collars are an actual match, the biggest issue will be visibility.
- These users thanked the author Kirley for the post:
- York-aholic (Wed Mar 15, 2023 5:37 am)
-
- Posts: 1351
- Joined: Mon Oct 26, 2020 2:31 pm
- Location: Portugal
- Has thanked: 6 times
- Been thanked: 169 times
Re: Martin Mammoth
I would guess a sousaphone bell would also be a few inches longer. The forward facing bell on the larger Reynolds BBb tuba has that sousaphone look, and the alternate upright bell is exceptionally tall, for the same length. Don't know how much it would lower the pitch. Incidentally, I believe I've read that old Martin bells will fit on that Reynolds.