Mack Brass Tuba TU410
4/4 sized, Miraphone copy
A few minor dents in the bell and some wear and tear in the finish on the bow below the bell.
Comes with a nice case with wheels as well.
I had the rotors notched (Mack Brass does not do this) with Chris Roush back in the summer of 2021 where I traveled from Mid- Michigan to Tennessee.
Asking $2,000, and am willing travel a few hours to meet up, but I am in the Mid-Michigan area. No shipping, please. It has had regularly cleanings and chem baths since through Marshall Music in Lansing, Mi. I have recordings of the horn if you are so interested. Thank you
Mack Brass TU410
Forum rules
This is for buying or selling your personal equipment, but sponsored selling is allowed as well. We are requiring all ads to have the following information. Price, (even for trades) Brand, Model, and location (for instruments, not accessories) need to be included in the ad, or at least be very clear in link provided. It is acceptable to link to an external ad if you are promoting a sale of your personal equipment. No Ebay Auctions, but Buy it now listings are fine. Photos are HIGHLY suggested as well. If you see an ad that does not meet these criteria, please report it.
This is for buying or selling your personal equipment, but sponsored selling is allowed as well. We are requiring all ads to have the following information. Price, (even for trades) Brand, Model, and location (for instruments, not accessories) need to be included in the ad, or at least be very clear in link provided. It is acceptable to link to an external ad if you are promoting a sale of your personal equipment. No Ebay Auctions, but Buy it now listings are fine. Photos are HIGHLY suggested as well. If you see an ad that does not meet these criteria, please report it.
Mack Brass TU410
- Attachments
-
- IMG_0039.jpeg (38.52 KiB) Viewed 1292 times
-
- IMG_0038.jpeg (33.67 KiB) Viewed 1292 times
-
- IMG_0037.jpeg (33.51 KiB) Viewed 1292 times
-
- IMG_0035.jpeg (37.51 KiB) Viewed 1292 times
-
- IMG_0033.jpeg (49.65 KiB) Viewed 1292 times
-
- IMG_0032.jpeg (52.78 KiB) Viewed 1292 times
-
- IMG_0031.jpeg (40.41 KiB) Viewed 1292 times
Last edited by RyeGuy25 on Sun Nov 12, 2023 9:14 pm, edited 1 time in total.
-
Mary Ann
- Posts: 3030
- Joined: Thu Aug 13, 2020 9:24 am
- Has thanked: 518 times
- Been thanked: 598 times
Re: Mack Brass TU410
You do realize that a brand new one of these is now going for $2295?
- These users thanked the author Mary Ann for the post (total 3):
- arpthark (Sun Nov 12, 2023 1:29 pm) • RyeGuy25 (Sun Nov 12, 2023 1:41 pm) • LibraryMark (Sun Nov 12, 2023 6:37 pm)
-
Dents Be Gone!
- Posts: 596
- Joined: Thu Apr 06, 2023 5:13 am
- Has thanked: 166 times
- Been thanked: 147 times
.
I agree, guys. This is the way to go.
Last edited by Dents Be Gone! on Wed May 01, 2024 10:13 am, edited 1 time in total.
Re: Mack Brass TU410
Yes! I’m willing to negotiate. This is just a starting price, but I did spend an addition 350 on rotor notching as well. That’s why I have it priced this high at the moment!
Re: Mack Brass TU410
Yea, so Mack Brass does not notch their rotors which helps when replacing the rubber stops and aligning the rotor casing in the valve casing of the horn. I spent and additional 350 on this to add some value to the horn. But as I mentioned before, I am willing to talk prices! This 2,250 was just an estimate giving from an appraisal.
-
Dents Be Gone!
- Posts: 596
- Joined: Thu Apr 06, 2023 5:13 am
- Has thanked: 166 times
- Been thanked: 147 times
.
I agree, guys. This is the way to go.
Last edited by Dents Be Gone! on Wed May 01, 2024 10:13 am, edited 1 time in total.
-
The Big Ben
- Posts: 409
- Joined: Thu Aug 13, 2020 12:38 pm
- Has thanked: 34 times
- Been thanked: 62 times
Re: Mack Brass TU410
But any extra "value" is taken away by the fact the horn has dents in it and there is a huge patch of lacquer gone.
- These users thanked the author The Big Ben for the post:
- jtm (Mon Nov 13, 2023 1:23 pm)
-
MN_TimTuba
- Posts: 598
- Joined: Thu Aug 13, 2020 3:33 pm
- Location: Wadena County, Minnesota
- Has thanked: 728 times
- Been thanked: 167 times
Re: Mack Brass TU410
Sounds like y'all uns are free to make an offer. I'm not interested, so I see no point in kickin' another man's dog.
Good luck with your sale!
Good luck with your sale!
MN_Tim
Lee Stofer Custom 2341-5
Miraphone 83 Eb
Miraphone 191-5 (formerly)
Holton BBb345 (formerly and fondly)
Lee Stofer Custom 2341-5
Miraphone 83 Eb
Miraphone 191-5 (formerly)
Holton BBb345 (formerly and fondly)
Re: Mack Brass TU410
They're kicking his dog because he's trying to find a rube to pay more than it's worth.MN_TimTuba wrote: ↑Mon Nov 13, 2023 1:51 pm Sounds like y'all uns are free to make an offer. I'm not interested, so I see no point in kickin' another man's dog.
Good luck with your sale!
- These users thanked the author Doug for the post (total 2):
- LibraryMark (Tue Nov 14, 2023 9:02 am) • the elephant (Wed Nov 15, 2023 3:43 am)
Doug Black
Assistant Professor of Music, Alabama A&M University
Eastman Tuba Artist
Assistant Professor of Music, Alabama A&M University
Eastman Tuba Artist
-
LibraryMark
- Posts: 110
- Joined: Thu Aug 13, 2020 3:37 pm
- Has thanked: 70 times
- Been thanked: 23 times
Re: Mack Brass TU410
So here is a picture of the backside of the 3rd valve of my Mack 410, bought in 2016. Witness marks are clearly visible from the factory. They are not big, but they are there. as far as I am concerned the only way to make sure your valves are indexed is to use a bore scope.
- valve.jpg (84.06 KiB) Viewed 1109 times
-
Tooliberal4u
- Lurker
- Posts: 1
- Joined: Sat Sep 28, 2024 5:37 am
- Has thanked: 0
- Been thanked: 0
Re: Mack Brass TU410
Among other things, I'm a professional brass tech. That someone would ask $350 to stick a borescope up a valve section in order to make a few marks is just embarrassing. Yikes. That's a 15 minute job.