Thickest Piston/Rotor Oil?
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
-
tylerferris1213
- Posts: 223
- Joined: Fri Aug 14, 2020 11:23 am
- Location: NW Ohio
- Has thanked: 17 times
- Been thanked: 12 times
Thickest Piston/Rotor Oil?
I work on a lot of vintage instruments that are on the verge of needing a valve section rebuild because of wear. What do you find to be the best valve oil to help these instruments limp along? I know of Meinlschmidt heavy piston & rotor, Monster "smoother," Yamaha vintage, and Hetman classic. I'm fine with anecdotal recommendations, but I also wonder if anyone has done an empirical viscosity measurement on various oils...
Tyler Ferris
Wessex British F
York Monster Eb
Getzen CB-50 CC
Cerveny CBB-601 BBb
"Yamayork" Frankentuba Subcontrabass FF
Wessex British F
York Monster Eb
Getzen CB-50 CC
Cerveny CBB-601 BBb
"Yamayork" Frankentuba Subcontrabass FF
Re: Thickest Piston/Rotor Oil?
.
Last edited by peterbas on Fri Jun 07, 2024 1:10 pm, edited 1 time in total.
-
bloke
- Mid South Music
- Posts: 19230
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3819 times
- Been thanked: 4073 times
Re: Thickest Piston/Rotor Oil?
I always use 30W (the last drippings from a new 5 quart jug after an oil change...which is usually enough to fill a 2-oz. needle oiler) on ROTOR bearings (certainly NOT rotor bodies), including NEWISH rotor bearings.
The VERY MOST WORN pistons (in order to be able to get any sort of characteristic sound out of those instruments) are also something with which you might see me using 30W.
The VERY MOST WORN pistons (in order to be able to get any sort of characteristic sound out of those instruments) are also something with which you might see me using 30W.
- These users thanked the author bloke for the post (total 2):
- tylerferris1213 (Wed Jan 31, 2024 10:50 am) • 2nd tenor (Wed Jan 31, 2024 12:38 pm)