off-the-cuff weight estimate: MTS 4/4 case
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
-
arpthark
- Posts: 3695
- Joined: Mon Aug 24, 2020 4:25 pm
- Location: Southeastern Connecticut
- Has thanked: 877 times
- Been thanked: 1018 times
- Contact:
off-the-cuff weight estimate: MTS 4/4 case
Any idea how much one of these weighs? Maybe 15-20 lbs?
Blake
Bean Hill Brass
Bean Hill Brass
Re: off-the-cuff weight estimate: MTS 4/4 case
Their website says 40.24 lbs…
Is that in the “carton?” Not sure.
https://mtsproducts.com/tuba-cases-standard
On TN, someone posted that MTS also gave a “spec weight” of 27.48 lbs, so…
I’m no help!
Is that in the “carton?” Not sure.
https://mtsproducts.com/tuba-cases-standard
On TN, someone posted that MTS also gave a “spec weight” of 27.48 lbs, so…
I’m no help!
Last edited by MiBrassFS on Thu Jun 20, 2024 4:44 pm, edited 1 time in total.
-
arpthark
- Posts: 3695
- Joined: Mon Aug 24, 2020 4:25 pm
- Location: Southeastern Connecticut
- Has thanked: 877 times
- Been thanked: 1018 times
- Contact:
Re: off-the-cuff weight estimate: MTS 4/4 case
A wee bit more than expected! I think that might be in the carton though. Thanks!MiBrassFS wrote: ↑Thu Jun 20, 2024 3:57 pm Their website says 40.24 lbs…
Is that in the “carton?” Not sure.
https://mtsproducts.com/tuba-cases-standard
Blake
Bean Hill Brass
Bean Hill Brass
-
matt g
- Posts: 2564
- Joined: Thu Aug 13, 2020 10:37 am
- Location: Southeastern New England
- Has thanked: 263 times
- Been thanked: 550 times
Re: off-the-cuff weight estimate: MTS 4/4 case
I had the jumbo MTS case and I’m guessing it weighed at most 25lbs? Certainly less than the 2165 it would hold.
I’d guess that 15-20 lbs estimate for the 4/4 case is good.
I’d guess that 15-20 lbs estimate for the 4/4 case is good.
Dillon/Walters CC (sold)
Meinl-Weston 2165 (sold)
Meinl-Weston 2165 (sold)
-
bloke
- Mid South Music
- Posts: 18835
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3711 times
- Been thanked: 3982 times
Re: off-the-cuff weight estimate: MTS 4/4 case
I would count on 20 or so for something big enough to carry a 186.
I have a shorty one here that's only about 3 ft long that accommodates my 19-in bell 32-in tuba, and I have another silver colored one here which is holding one of those King shoulder mounted contras. That one I know is the same frame that holds a 5450 Thor, so five quarter on that one. I'm just too exhausted to weigh them right now. I've been delivering and repairing horns all day.
The two cases mentioned above are probably smaller and larger than four quarter.
I have a shorty one here that's only about 3 ft long that accommodates my 19-in bell 32-in tuba, and I have another silver colored one here which is holding one of those King shoulder mounted contras. That one I know is the same frame that holds a 5450 Thor, so five quarter on that one. I'm just too exhausted to weigh them right now. I've been delivering and repairing horns all day.
The two cases mentioned above are probably smaller and larger than four quarter.