Re: 1904 York Eb
Posted: Thu Jun 22, 2023 12:40 pm
In all seriousness, thanks for your help and expertise.
In all seriousness, thanks for your help and expertise.
TubaForum.net
Tuba & euphonium forum, message board, and community.
https://tubaforum.net/
1904 York Eb
Page 2 of 2
In all seriousness, thanks for your help and expertise.
Re: 1904 York Eb
Posted: Thu Jun 22, 2023 6:00 pm
Valves:
What plating was used on these old horns' pistons? It's oddly bright and matte-shiny.
What plating was used on these old horns' pistons? It's oddly bright and matte-shiny.
Re: 1904 York Eb
Posted: Fri Jun 23, 2023 10:45 am
What you have is a model 51 York Monster Eb Bass.
Should be a 17 1/2" bell.
Should be a 17 1/2" bell.
Re: 1904 York Eb
Posted: Fri Jun 23, 2023 11:10 am
Thanks for this info! I believe it actually says the bell is 19", but the layout of that bit of ad copy is weird; I've attempted to reformat it:windshieldbug wrote: Fri Jun 23, 2023 10:45 am What you have is a model 51 York Monster Eb Bass.
Should be a 17 1/2" bell.
Length from edge of bell to base of largest bend, 33 in.
Width at valves, 17-1/2 in.
Diameter of bell, 19 in.
Weight, 18-1/2 lbs.
Re: 1904 York Eb
Posted: Fri Jun 23, 2023 1:38 pm
arpthark wrote: Fri Jun 23, 2023 11:10 am I believe it actually says the bell is 19”
Length from edge of bell to base of largest bend, 33 in.
Width at valves, 17-1/2 in.
Diameter of bell, 19 in.
Weight, 18-1/2 lbs.
I think you’re right!
Re: 1904 York Eb
Posted: Fri Jun 23, 2023 3:46 pm
3 minutes with Tarn-X:
