Re: Miraclone 186 tuning slide too short
Posted: Fri Dec 01, 2023 8:51 am
Interesting - how much did it run you? And - did it fit?
TubaForum.net
Tuba & euphonium forum, message board, and community.
https://tubaforum.net/
Miraclone 186 tuning slide too short
Page 2 of 2
Re: Miraclone 186 tuning slide too short
Posted: Fri Dec 01, 2023 11:02 am
It fit, he sent it to me at no charge and it corrected the sharpness.LibraryMark wrote: ↑Fri Dec 01, 2023 8:51 amInteresting - how much did it run you? And - did it fit?
I had also bought the tuba from him just several weeks prior so YMMV.
Re: Miraclone 186 tuning slide too short
Posted: Fri Dec 01, 2023 2:06 pm
Yeah, it's been a while. I will try to get hold of him. Thanks!Three Valves wrote: ↑Fri Dec 01, 2023 11:02 amIt fit, he sent it to me at no charge and it corrected the sharpness.LibraryMark wrote: ↑Fri Dec 01, 2023 8:51 amInteresting - how much did it run you? And - did it fit?
I had also bought the tuba from him just several weeks prior so YMMV.
Re: Miraclone 186 tuning slide too short
Posted: Wed Dec 27, 2023 12:29 pm
Gee - what's wrong with this picture?Three Valves wrote: ↑Thu Nov 30, 2023 3:22 pm
I needed one several years ago.
I called.
He sent.
It fit.
- slides_01.jpg (84.87 KiB) Viewed 529 times
Re: Miraclone 186 tuning slide too short
Posted: Wed Dec 27, 2023 12:43 pm
Re: Miraclone 186 tuning slide too short
Posted: Wed Dec 27, 2023 12:56 pm
Well... You could use the old one to extend the new one
Re: Miraclone 186 tuning slide too short
Posted: Sat Dec 30, 2023 9:36 am
As Mark pointed out, everything you need is there to make a longer slide.
Re: Miraclone 186 tuning slide too short
Posted: Sun Dec 31, 2023 5:32 am
.
Re: Miraclone 186 tuning slide too short
Posted: Sun Dec 31, 2023 11:12 am
It's great to have a really talented person nearby, but this job is not really one that particularly requires someone with extraordinary ability. You probably would like it to play down to pitch sooner, rather than later.
A reasonably good back-of-music-store person can disassemble those two slide assemblies, do some cutting, stick things back together, and you should have whatever extra length you need on each leg to reach 440 tuning with no problem. If you wanted to fix it later a little bit more elegantly, you would need to have Miraphone sell your repair person an extra long slide bow.
Since you seem to be near Elkhart, silver plating the final result would be easy as well.
Circling back, if that really talented repair guy is close by, why don't you just get this done with those parts that you have available by that person? An instrument that is difficult to deal with is almost as annoying as a lawnmower that won't start.
A reasonably good back-of-music-store person can disassemble those two slide assemblies, do some cutting, stick things back together, and you should have whatever extra length you need on each leg to reach 440 tuning with no problem. If you wanted to fix it later a little bit more elegantly, you would need to have Miraphone sell your repair person an extra long slide bow.
Since you seem to be near Elkhart, silver plating the final result would be easy as well.
Circling back, if that really talented repair guy is close by, why don't you just get this done with those parts that you have available by that person? An instrument that is difficult to deal with is almost as annoying as a lawnmower that won't start.