Serial #: 1815
Bell Diameter is 14 1/8,” bore is.705″ & height is 38 1/4.”
“MADE IN GERMANY” on back of bell. “MIRAFONE” on rim. “MIRAFONE / 1815” on front of bell.
https://simonettitubacollection.com/ins ... -5-rotary/
Tuba Tuesday: Mirafone, 184-5U, CC tuba, 5 rotary, 1961
-
bisontuba
- Posts: 938
- Joined: Thu Aug 13, 2020 8:08 am
- Location: Bottom of Lake Erie
- Has thanked: 148 times
- Been thanked: 697 times
Tuba Tuesday: Mirafone, 184-5U, CC tuba, 5 rotary, 1961
Happy Tuba Tuesday. Today, the a museum features a Mirafone, 184-5U, CC tuba, 5 rotary, 1961.
Serial #: 1815
Bell Diameter is 14 1/8,” bore is.705″ & height is 38 1/4.”
“MADE IN GERMANY” on back of bell. “MIRAFONE” on rim. “MIRAFONE / 1815” on front of bell.
https://simonettitubacollection.com/ins ... -5-rotary/
Serial #: 1815
Bell Diameter is 14 1/8,” bore is.705″ & height is 38 1/4.”
“MADE IN GERMANY” on back of bell. “MIRAFONE” on rim. “MIRAFONE / 1815” on front of bell.
https://simonettitubacollection.com/ins ... -5-rotary/
- These users thanked the author bisontuba for the post (total 5):
- the elephant (Tue Aug 16, 2022 8:29 am) • hrender (Tue Aug 16, 2022 9:54 am) • bloke (Wed Aug 17, 2022 9:28 am) • York-aholic (Wed Aug 17, 2022 9:01 pm) • Mark E. Chachich (Sat Aug 20, 2022 10:44 am)
-
bloke
- Mid South Music
- Posts: 19307
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3846 times
- Been thanked: 4099 times
Re: Tuba Tuesday: Mirafone, 184-5U, CC tuba, 5 rotary, 1961
My experience has been that the earlier ones (with the upside-down question-mark-shaped B-flat-tuba-style connector - between the 4th rotor and tuning slide) tend to barely play up to A=440, and the later ones (with the same part shortened to a sharp right angle) tend to require that the tuning slide be pulled way out - to achieve A=440.
I owned a couple of those (both with the sharp-right-angle piece), both to which I added my own style of 5th rotor.
One of them ended up eventually being owned by Ron Bishop, and was sold by his estate to someone else.
I believe the other one (??) ended up at a Memphis high school. I've been over there since I've seen it, and did not see it there. I have no idea whether that one "walked off" or what.
The "Bishop" one featured a choice of GG semitone or GG whole tone (piggyback horizontal system).
The first piece I played (after adding the 5th valve) was in the pit - playing the opera, "The Love for Three Oranges" (quite a few LOW pitches written throughout).
I owned a couple of those (both with the sharp-right-angle piece), both to which I added my own style of 5th rotor.
One of them ended up eventually being owned by Ron Bishop, and was sold by his estate to someone else.
I believe the other one (??) ended up at a Memphis high school. I've been over there since I've seen it, and did not see it there. I have no idea whether that one "walked off" or what.
The "Bishop" one featured a choice of GG semitone or GG whole tone (piggyback horizontal system).
The first piece I played (after adding the 5th valve) was in the pit - playing the opera, "The Love for Three Oranges" (quite a few LOW pitches written throughout).