Page 1 of 1

CURVED euphonium adapter from old British receiver to large shank mouthpiece

Posted: Fri Sep 22, 2023 6:24 pm
by bloke
Would anyone like to buy this and additionally pay about $5 postage for me to send it in some bubble wrap in a padded envelope?

Adapters are typically $10 - $15, but this one is a "bit" of a rarity, so I'm going to ask $30.

After all...The 2023 $30 is the 2020 $15. :teeth: :thumbsup:

Image

Re: CURVED euphonium adapter from old British receiver to large shank mouthpiece

Posted: Mon Sep 25, 2023 3:19 pm
by funkhoss
Are you sure this is a euphonium adapter?

It looks exactly like the bit that came from the factory with B&H Imperial compensating tubas. I had such a bit at one time, that came with a very well-preserved Imperial from the mid 1950's that I bought.

I've linked pictures below of the bit that I had, as well as a scan of an old advertisement that shows the bit installed on one of these tubas.

Image
Image
Image

Re: CURVED euphonium adapter from old British receiver to large shank mouthpiece

Posted: Mon Sep 25, 2023 5:37 pm
by bloke
The small end fits the old English (and WIllson 2900) in-between size euphonium receivers, and the large end is brass trombone shank...but I'll go back and see if it bottoms out in bass shank receivers.

I'd give you a 73.224% chance that you're right, and I'm wrong. :thumbsup:

.

Posted: Tue Sep 26, 2023 3:01 am
by Dents Be Gone!
I agree, guys. This is the way to go.

Re: CURVED euphonium adapter from old British receiver to large shank mouthpiece

Posted: Tue Sep 26, 2023 11:34 am
by bloke
LOL...One thing I ain't gonna do (as it usually doesn't turn out well) is to puff out my chest and insist that I'm "right". :laugh:

BUT IN THIS PARTICULAR CASE...

I just now checked it on one of my Besson small-shank (bass trombone size) receiver tubas, and the bit/adapter BOTTOMS OUT in the (tuba) small (bass trombone sized) receiver at the curve and RATTLES...

...so (though I believe this adapter/bit IS a Edgware Rd. Besson product, and the same STYLING as your bit) I'm sticking with representing it as per my original claim.

I DO VERY MUCH APPRECIATE the cautionary heads-up. :smilie8: :thumbsup:

Re: CURVED euphonium adapter from old British receiver to large shank mouthpiece

Posted: Tue Sep 26, 2023 11:40 am
by funkhoss
Well...very interesting! I learned something!

It's baffling to me why B&H would make such a bit. If this were used to adapt a large-shank mouthpiece to any medium-shank B&H/Besson euphonium I've ever played, it would probably render the instrument unusably flat (based on how little the tuning slide is pulled without a bit).

Good luck with the sale--hopefully someone will see this and find it useful!

Re: CURVED euphonium adapter from old British receiver to large shank mouthpiece

Posted: Tue Sep 26, 2023 1:06 pm
by bloke
funkhoss wrote: Tue Sep 26, 2023 11:40 am Well...very interesting! I learned something!

It's baffling to me why B&H would make such a bit. If this were used to adapt a large-shank mouthpiece to any medium-shank B&H/Besson euphonium I've ever played, it would probably render the instrument unusably flat (based on how little the tuning slide is pulled without a bit).

Good luck with the sale--hopefully someone will see this and find it useful!
:thumbsup:

I found it in one of my boxes of "stuff-from-who-knows-where"...I don't need it. It's not taking up space, but I'd rather it be money than "something-not-needed-by-me".

If I'm asking too much (??), the market should function - as it always does (when allowed to do so). :teeth:

brainstorming for a possible purpose: (???)
- Euphoniums' mouthpipes come out sideways (as with the Yorkophone front-action tubas' mouthpipes).
- The bit would straighten the angle of the instrument (particularly for those who could - then - rest the instrument on their lap).
- It would also serve as what it seems to be: an adapter from a less-common-shank mouthpiece to a more-common-shank mouthpiece.

Any/all of these could be shouted down as dumb guesses...but - hey: "I got nuthin..." so... :smilie6: