arpthark's post-holiday clean out (tubas, trombones, mute, random stuff)
Posted: Tue Jan 02, 2024 2:16 pm
Hopefully over the next couple weeks I will get around to cleaning up and posting everything I have for sale here. If anything speaks to you, please let me know and I can prioritize photos and cleanup. Most large items will need to be picked up here in southeastern CT or I can meet you in the New England/NYC Metro area. For shipped items buyer will pay actual shipping cost.
Send me a PM or email beanhillbrass at gmail. Thanks!
- 1969 Conn 73H 2 valve dependent bass trombone w/ D slide, recently repaired broken main brace, cosmetically rough but plays great. $1,200
- Olds Ambassador tenor trombone. Sturdy little horn, pics posted elsewhere on this site. $100, can ship
- "Horton" cornet, probably Czech, not a terrible instrument, with case, $35, can ship
- Two Reynolds Medalist trumpets. I think of these as "marching band" horns. One is older with nicer fittings (Cleveland era) but in rougher shape, one is newer with plainer fittings (Texas) but in nicer shape. $50 each, can ship
- pBone, orange, repaired a cracked tuning slide with epoxy, $35, can ship
- Bundy/Selmer/Martin(?) sousaphone neck, $40, can ship
- Still a few mouthpieces left, as seen here: viewtopic.php?t=8180
ON HOLD: - Bach "Liberty" straight tenor. Bad dent work performed by somebody (not me) on bell section. Slide decent. I think this might be made in China. Sounds nice. $50, can ship
SOLD: - Conn 28K 4v Eb sousaphone, silver, good shape, needs polishing, no neck or bits (sorry!) $1,200
- SOLD: King 606 tenor, used a lot! Lots of lacquer wear and "acidic hands" brass wear at contact points. Nice slide action but missing a bit of chrome. Serial 899xxx points to 1982 or so. Nice little horn. $100, can ship
- SOLD: King 606 tenor, newer with the bell lacquer-stripped. Nice slide, no wear. Some evidence of past repair. From the 90s or early 2000s based on engraving and serial numbers on handslide. $100, can ship
- SOLD: Dent ball set. Not magnetic. I wound up with two of these. Includes cable tool. $500, can ship. Will post on repair forum
- SOLD: Yamaha 621 F tuba clone made by Jin Bao, $2,150, can ship viewtopic.php?t=8051
- SOLD: 1926 Buescher 3v BBb recording bell tuba in satin silver, silver at approx. 90% or so and mostly in a really nice/smooth dark purple patina. Smaller 18" recording bell. Valves in good shape with minimal plating loss. No case. $700
- SOLD: older Jupiter tenor trombone w/ F attachment. Larger bore. Slide decent when lubed. Lacquer wear. $225
- SOLD: MTS 4/4 size tuba case (I think this is the 1207v). In good shape, mostly unused interior with some scuffs on exterior. $200 SOLD
- SOLD Blessing 3v euph, body made in Elkhart and valves made by Bauerfeind in Germany. Valves in really nice shape, body kinda rough with dents and dings, bell needs rolled out. floated a bit of solder over a 2nd valve slide pin hole to patch it, no case. $150 SOLD
- Kruspe 4v rotary BBb, 100+ years old, 5/4 "mini Kaiser" size (45" tall), string linkage, patches, still needs a bit of dent work and cleaning up to be a looker, $1,500 as-is SOLD
- Schiller nickel-plated tenor trombone w/ F attachment, Bach 42BO copy made in China. Very nice slide. $400 SOLD
- SOLD: Humes and Berg Stonelined tuba mute. Needs a portion reglued but still works fine. I might just hot glue it. $50, can possibly ship
Send me a PM or email beanhillbrass at gmail. Thanks!
- 1969 Conn 73H 2 valve dependent bass trombone w/ D slide, recently repaired broken main brace, cosmetically rough but plays great. $1,200
- Olds Ambassador tenor trombone. Sturdy little horn, pics posted elsewhere on this site. $100, can ship
- "Horton" cornet, probably Czech, not a terrible instrument, with case, $35, can ship
- Two Reynolds Medalist trumpets. I think of these as "marching band" horns. One is older with nicer fittings (Cleveland era) but in rougher shape, one is newer with plainer fittings (Texas) but in nicer shape. $50 each, can ship
- pBone, orange, repaired a cracked tuning slide with epoxy, $35, can ship
- Bundy/Selmer/Martin(?) sousaphone neck, $40, can ship
- Still a few mouthpieces left, as seen here: viewtopic.php?t=8180
ON HOLD: - Bach "Liberty" straight tenor. Bad dent work performed by somebody (not me) on bell section. Slide decent. I think this might be made in China. Sounds nice. $50, can ship
SOLD: - Conn 28K 4v Eb sousaphone, silver, good shape, needs polishing, no neck or bits (sorry!) $1,200
- SOLD: King 606 tenor, used a lot! Lots of lacquer wear and "acidic hands" brass wear at contact points. Nice slide action but missing a bit of chrome. Serial 899xxx points to 1982 or so. Nice little horn. $100, can ship
- SOLD: King 606 tenor, newer with the bell lacquer-stripped. Nice slide, no wear. Some evidence of past repair. From the 90s or early 2000s based on engraving and serial numbers on handslide. $100, can ship
- SOLD: Dent ball set. Not magnetic. I wound up with two of these. Includes cable tool. $500, can ship. Will post on repair forum
- SOLD: Yamaha 621 F tuba clone made by Jin Bao, $2,150, can ship viewtopic.php?t=8051
- SOLD: 1926 Buescher 3v BBb recording bell tuba in satin silver, silver at approx. 90% or so and mostly in a really nice/smooth dark purple patina. Smaller 18" recording bell. Valves in good shape with minimal plating loss. No case. $700
- SOLD: older Jupiter tenor trombone w/ F attachment. Larger bore. Slide decent when lubed. Lacquer wear. $225
- SOLD: MTS 4/4 size tuba case (I think this is the 1207v). In good shape, mostly unused interior with some scuffs on exterior. $200 SOLD
- SOLD Blessing 3v euph, body made in Elkhart and valves made by Bauerfeind in Germany. Valves in really nice shape, body kinda rough with dents and dings, bell needs rolled out. floated a bit of solder over a 2nd valve slide pin hole to patch it, no case. $150 SOLD
- Kruspe 4v rotary BBb, 100+ years old, 5/4 "mini Kaiser" size (45" tall), string linkage, patches, still needs a bit of dent work and cleaning up to be a looker, $1,500 as-is SOLD
- Schiller nickel-plated tenor trombone w/ F attachment, Bach 42BO copy made in China. Very nice slide. $400 SOLD
- SOLD: Humes and Berg Stonelined tuba mute. Needs a portion reglued but still works fine. I might just hot glue it. $50, can possibly ship