Fix, parts, or scrap?
Fix, parts, or scrap?
Hi Friends,
I found this old King/HN White/Cleveland sousaphone on top of a locker. It is missing the leadpipe assembly, but the valves move smoothly.
Fix it up, part it out, or off to my local scrapyard. (They pay pretty well for brass.)
I found this old King/HN White/Cleveland sousaphone on top of a locker. It is missing the leadpipe assembly, but the valves move smoothly.
Fix it up, part it out, or off to my local scrapyard. (They pay pretty well for brass.)
1960 186CC
B&S 5099/PT-15
Cerveny 653
A bunch of string instruments
B&S 5099/PT-15
Cerveny 653
A bunch of string instruments
- arpthark
- Posts: 5988
- Joined: Mon Aug 24, 2020 4:25 pm
- Has thanked: 1883 times
- Been thanked: 2034 times
Re: Fix, parts, or scrap?
Fix! These are great sousaphones.
I owned one which was school surplus. The thing to watch out for if buying a neck is to buy the old-style King neck instead of the new-style King neck. They're both L-shaped, but the old one has the mouthpiece receiver on the short end of the L and the new one has the receiver on the long end of the L. Just based on the lacquer and the look of this one, I am almost sure it takes an old-style neck.
Send it up to Connecticut and I'll strip the orange lacquer and un-goof it a little bit!
I owned one which was school surplus. The thing to watch out for if buying a neck is to buy the old-style King neck instead of the new-style King neck. They're both L-shaped, but the old one has the mouthpiece receiver on the short end of the L and the new one has the receiver on the long end of the L. Just based on the lacquer and the look of this one, I am almost sure it takes an old-style neck.
Send it up to Connecticut and I'll strip the orange lacquer and un-goof it a little bit!
- LeMark
- Site Admin
- Posts: 3163
- Joined: Wed Aug 12, 2020 8:03 am
- Location: Arlington TX
- Has thanked: 96 times
- Been thanked: 1006 times
Re: Fix, parts, or scrap?
I'm hoping you're trolling us here and you wouldn't consider scrapping an HN white sousa because of a misssing neck
Yep, I'm Mark
-
Schlitzz
- Posts: 829
- Joined: Mon Sep 21, 2020 11:36 am
- Location: Kitsapalaccia, WA
- Has thanked: 180 times
- Been thanked: 172 times
Re: Fix, parts, or scrap?
This is one of those perfect pitch exercises for one of those viola players. You toss it into a flaming dumpster, without hitting the sides. Nothing but net.
Seriously? FIX IT!!!
Seriously? FIX IT!!!
Yamaha 641
Hirsbrunner Euph
I hate broccoli.
Hirsbrunner Euph
I hate broccoli.
- Sousaswag
- Posts: 1016
- Joined: Thu Aug 20, 2020 1:55 pm
- Has thanked: 25 times
- Been thanked: 452 times
Re: Fix, parts, or scrap?
Old instruments are always worth fixing. Especially that one.
Meinl Weston "6465"
Meinl Weston 2141
Willson 3200RZ-5
Holton 345
Holton 350
Conn Double-Bell Euphonium
Meinl Weston 2141
Willson 3200RZ-5
Holton 345
Holton 350
Conn Double-Bell Euphonium
- bort2.0
- Posts: 5768
- Joined: Thu Aug 13, 2020 9:13 am
- Location: Minneapolis
- Has thanked: 412 times
- Been thanked: 1208 times
Re: Fix, parts, or scrap?
In general, it's pretty obvious when the answer isn't "fix"
But this one is a "fix"
But this one is a "fix"
- bloke
- Mid South Music
- Posts: 24875
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 5274 times
- Been thanked: 6035 times
Re: Fix, parts, or scrap?
It's also missing the lower mouth pipe tube and receiver as well as the bracing system for the lower mouth pipe. It's actually missing several hundred dollars worth of parts, but there's still no reason to "scrap" a sousaphone, because of all the other parts are worth so much money.
I distinguish "scrapping" from "parting out" - and I distinguish both of those from "selling as is", but I still don't know if the person that owns this instrument could make a profit after paying a repair guy to straighten out the instrument and supplying the expensive parts.
I've dealt with the current prices on those parts routinely and very recently; it's not casual money anymore.
Today, even Jupiter repair parts (which could be frankensteined on to that King) pricing is highfalutin.
I distinguish "scrapping" from "parting out" - and I distinguish both of those from "selling as is", but I still don't know if the person that owns this instrument could make a profit after paying a repair guy to straighten out the instrument and supplying the expensive parts.
I've dealt with the current prices on those parts routinely and very recently; it's not casual money anymore.
Today, even Jupiter repair parts (which could be frankensteined on to that King) pricing is highfalutin.
Last edited by bloke on Fri Jun 19, 2026 9:40 am, edited 1 time in total.
- the elephant
- Posts: 4831
- Joined: Thu Aug 13, 2020 8:39 am
- Location: 32°50'57.0"N 90°24'34.9"W
- Has thanked: 3045 times
- Been thanked: 2402 times
Re: Fix, parts, or scrap?
I'll take it if you don't want it.

- These users thanked the author the elephant for the post (total 2):
- arpthark (Fri Jun 19, 2026 9:14 am) • bloke (Fri Jun 19, 2026 9:39 am)

- bloke
- Mid South Music
- Posts: 24875
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 5274 times
- Been thanked: 6035 times
Re: Fix, parts, or scrap?
off-topic:
I sold that really nice 1970s lightweight King fiberglass that I had. I'm not sure why I sold it
I have a gig in October whereby I'm going to need a sousaphone. I have some 20Ks upstairs - one or two of which are playable, but those are for selling eventually. To each his own, but (not enough "punch") I just don't like playing those. (Maybe, because my sousaphone jobs - these days - are so few and far between is why I sold the fiberglass.)
Previously, I also sold another brass (very worn silver, zero dents) King - as an emergency sousaphone - to a college. It had a circa 1949 body mated it to a 1960 bell. It weighed a full 30 lbs. (Not approximately, but THIRTY) This one will be a bit lighter and will feature much better piston/casing tolerances.
...Maybe (??) I'll install an upper number one tuning slide on this one and eliminate the lower #1 tuning slide for epic on-the-fly tuning (to eliminate most of those three valve tuba tuning compromises).
Re: Fix, parts, or scrap?
Thanks for the replies! I'm trying to get some stuff cleaned out of long term storage. We'll see what happens in September..
We have too many souzies at school. (I said to overhaul the fiberglass Kings, they ordered new Jupiters.
)
We have too many souzies at school. (I said to overhaul the fiberglass Kings, they ordered new Jupiters.
1960 186CC
B&S 5099/PT-15
Cerveny 653
A bunch of string instruments
B&S 5099/PT-15
Cerveny 653
A bunch of string instruments
- Mary Ann
- Posts: 4262
- Joined: Thu Aug 13, 2020 9:24 am
- Has thanked: 815 times
- Been thanked: 931 times
- the elephant
- Posts: 4831
- Joined: Thu Aug 13, 2020 8:39 am
- Location: 32°50'57.0"N 90°24'34.9"W
- Has thanked: 3045 times
- Been thanked: 2402 times
