Looking to purchase ONE bell screw for a Holton J350 or equivalent 60’s era Holton Sousa bell screw.
That’s it. Thanks!
Found - Holton J350 Bell Screw
Forum rules
When making a listing for large or expensive items, please include your budget and location. That will help you match with a seller that might have the item you are looking for
When making a listing for large or expensive items, please include your budget and location. That will help you match with a seller that might have the item you are looking for
-
KerryAbear
- Posts: 46
- Joined: Sat Nov 05, 2022 4:39 am
- Location: Connecticut
- Has thanked: 16 times
- Been thanked: 6 times
Re: WTB - Holton J350 Bell Screw
If you have one, a machinist should be able to make you a copy without any problems.
VMI 103 BB♭ Tuba
Besson Stratford E♭ Tuba
Yamaha YBL-421G Bass Trombone
Willson Euphonium
Besson Stratford E♭ Tuba
Yamaha YBL-421G Bass Trombone
Willson Euphonium
-
YorkNumber3.0
- Posts: 321
- Joined: Sun Aug 16, 2020 5:50 pm
- Has thanked: 36 times
- Been thanked: 98 times
Re: WTB - Holton J350 Bell Screw
.
Last edited by YorkNumber3.0 on Mon Aug 28, 2023 5:59 pm, edited 1 time in total.
-
the elephant
- Posts: 3411
- Joined: Thu Aug 13, 2020 8:39 am
- Location: 404 - Not Found
- Has thanked: 1903 times
- Been thanked: 1346 times
Re: WTB - Holton J350 Bell Screw
Yes, Allied sells all these things in big kits, so what it is from is far less important as a good, clear, well-lit photograph, perhaps with the thread pitch listed. (A quick trip to a hardware store will tell you what the tread is.)
-
bloke
- Mid South Music
- Posts: 19357
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3856 times
- Been thanked: 4110 times
Re: WTB - Holton J350 Bell Screw
A steel screw of the proper thread (if difficult to find a brass one online) could be
- cut to desired length
- rounded off for easy "starting"
Then...
A FUBAR (bent-threads Conn/King/etc. bell screw could have it's FUBAR threads cut off, the center of the knurled head drilled out, the hole threaded to the Holton threads, the steel screw threaded into the salvaged brass knurled head, silver brazed in place, and then cleaned up.
If (even) a "free" screw is desired, MOTORCYCLE customizing addicts (there seem to be some in every town) usually have huge amounts of odd-thread/seemingly-proprietary thread sizes of screws (bolts) in this size range.
These are suggestions for POSSIBLE local solutions, without buying anything and without needing a lathe.
If (??) this suggestion is viable, you might need to pay a repair guy to braze and buff the knurled head, though...OR buy them a cheeseburger, fries, and a coke.
ALL OF THAT
crap having been typed...
IF (??) it's one of these two goofy sizes, Ferree's offers these:
(question to the TFFJ: Are these the sizes for Olds/Reynolds and Holton, or something else?)
C75KB 1/4-28 thread (brass)
C75KN 1/4-28 thread (nickel)
C75LB 1/4-24 thread (brass)
C75LN 1/4-24 thread (nickel)
Sku: C75HB
- cut to desired length
- rounded off for easy "starting"
Then...
A FUBAR (bent-threads Conn/King/etc. bell screw could have it's FUBAR threads cut off, the center of the knurled head drilled out, the hole threaded to the Holton threads, the steel screw threaded into the salvaged brass knurled head, silver brazed in place, and then cleaned up.
If (even) a "free" screw is desired, MOTORCYCLE customizing addicts (there seem to be some in every town) usually have huge amounts of odd-thread/seemingly-proprietary thread sizes of screws (bolts) in this size range.
These are suggestions for POSSIBLE local solutions, without buying anything and without needing a lathe.
If (??) this suggestion is viable, you might need to pay a repair guy to braze and buff the knurled head, though...OR buy them a cheeseburger, fries, and a coke.
ALL OF THAT
crap having been typed...IF (??) it's one of these two goofy sizes, Ferree's offers these:
(question to the TFFJ: Are these the sizes for Olds/Reynolds and Holton, or something else?)
C75KB 1/4-28 thread (brass)
C75KN 1/4-28 thread (nickel)
C75LB 1/4-24 thread (brass)
C75LN 1/4-24 thread (nickel)
Sku: C75HB
Re: WTB - Holton J350 Bell Screw
If you're looking for an exact match, post a pic, that will help. I tried the same with my Martin but never found a match, so I just picked up a compatible one from a local music store. If you have an older music store in town, talk to them, they might have one among their parts.