WTB: B&S 5th slide extension
Forum rules
When making a listing for large or expensive items, please include your budget and location. That will help you match with a seller that might have the item you are looking for
When making a listing for large or expensive items, please include your budget and location. That will help you match with a seller that might have the item you are looking for
-
- Posts: 1424
- Joined: Thu Aug 13, 2020 10:39 pm
- Location: SoCal
- Has thanked: 1546 times
- Been thanked: 465 times
Re: WTB: B&S 5th slide extension
I don’t know what this came from but think it was a B&S 5th valve extension.
I’ll take some careful measurements tomorrow night if that looks like it could work.
I’ll take some careful measurements tomorrow night if that looks like it could work.
Some old Yorks, Martins, and perhaps a King rotary valved CC
- LargeTuba
- Posts: 777
- Joined: Thu Aug 13, 2020 11:08 am
- Has thanked: 97 times
- Been thanked: 136 times
Re: WTB: B&S 5th slide extension
That Could Potentially work, thanks for measuring! It would need to be the right bore(.825), I'm guessing the legs could be moved to be the correct width.York-aholic wrote: ↑Wed Mar 27, 2024 10:22 pm I don’t know what this came from but think it was a B&S 5th valve extension.
IMG_0420.jpeg
I’ll take some careful measurements tomorrow night if that looks like it could work.
Thanks!
Pt-6P, Holton 345 CC, 45slp
- arpthark
- Posts: 3871
- Joined: Mon Aug 24, 2020 4:25 pm
- Location: Southeastern Connecticut
- Has thanked: 938 times
- Been thanked: 1062 times
- Contact:
Re: WTB: B&S 5th slide extension
Did B&S make the extensions for the piston tubas? I've only ever seen them for the rotary tubas where the fifth valve comes first in line in the valve block.
Blake
Bean Hill Brass
Bean Hill Brass
Re: WTB: B&S 5th slide extension
They exist with the new MRP-C(P), so if they didn’t then, they do now!
Meinl Weston 2165
B&M CC
Willson 3200RZ-5
Holton 340
Holton 350
Pan-American Eb
King Medium Eb
B&M CC
Willson 3200RZ-5
Holton 340
Holton 350
Pan-American Eb
King Medium Eb
-
- Posts: 1424
- Joined: Thu Aug 13, 2020 10:39 pm
- Location: SoCal
- Has thanked: 1546 times
- Been thanked: 465 times
Re: WTB: B&S 5th slide extension
Picky, picky...
Some old Yorks, Martins, and perhaps a King rotary valved CC
- LargeTuba
- Posts: 777
- Joined: Thu Aug 13, 2020 11:08 am
- Has thanked: 97 times
- Been thanked: 136 times
Re: WTB: B&S 5th slide extension
My friend has a MRP-C(p) and I tried it with mine, I really liked it. Mr. Perantoni has been trying to make this a standard feature for awhile.
Pt-6P, Holton 345 CC, 45slp
Re: WTB: B&S 5th slide extension
Andy Smith had a few of these for sale several months ago, possibly on this forum. That is where I would start.
Just be aware they are not necessarily plug and play, as the slide tube spacing on the main portions of the 5th valve slides are not consistent to a tolerance of good slide function, and thus neither the short slides, nor the long slides, are necessarily interchangeable without some (hopefully) minor adjustment of the tube spacing.
The longer tubing does make a significant different in the low register response on the PT6 and MRP.
Just be aware they are not necessarily plug and play, as the slide tube spacing on the main portions of the 5th valve slides are not consistent to a tolerance of good slide function, and thus neither the short slides, nor the long slides, are necessarily interchangeable without some (hopefully) minor adjustment of the tube spacing.
The longer tubing does make a significant different in the low register response on the PT6 and MRP.
-
- Posts: 1424
- Joined: Thu Aug 13, 2020 10:39 pm
- Location: SoCal
- Has thanked: 1546 times
- Been thanked: 465 times
Re: WTB: B&S 5th slide extension
Sorry, the one I pictured above has a .750" ID bore.
Some old Yorks, Martins, and perhaps a King rotary valved CC
Re: WTB: B&S 5th slide extension
The fifth valve slide assembly on the PT6/MRP is a .750 bore. Since it is the top valve in the rotor stack, it would be odd if it were otherwise. The larger bore valve is the 4th valve.
The one you have, York-aholic, however, appears to be a 5th valve assembly for either a different generation, or for a different instrument. At least current ones do not include the dogleg in the down tubing which may not allow the tubing to extend down in the gap between the underside of other tubing off the valves and the 5th valve actuator rod. If the main portion of the slide fits, the dogleg (not in recent assemblies) might place the slide in the proper place. Though that could be checked with access to a PT6 or MRP.
Mike
The one you have, York-aholic, however, appears to be a 5th valve assembly for either a different generation, or for a different instrument. At least current ones do not include the dogleg in the down tubing which may not allow the tubing to extend down in the gap between the underside of other tubing off the valves and the 5th valve actuator rod. If the main portion of the slide fits, the dogleg (not in recent assemblies) might place the slide in the proper place. Though that could be checked with access to a PT6 or MRP.
Mike
- LargeTuba
- Posts: 777
- Joined: Thu Aug 13, 2020 11:08 am
- Has thanked: 97 times
- Been thanked: 136 times
Re: WTB: B&S 5th slide extension
The ones Andy smith were selling are for rotary pt-6s.
I asked the man himself and the 5th is bigger. 4th is .770 and 5th is around .830. Older ones might be 0.750 in the 5tj valve.
I asked the man himself and the 5th is bigger. 4th is .770 and 5th is around .830. Older ones might be 0.750 in the 5tj valve.
Pt-6P, Holton 345 CC, 45slp