3rd valve inconsistency

Tubas, euphoniums, mouthpieces, and anything music-related.
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
Post Reply
User avatar
sdloveless
Posts: 198
Joined: Sun Aug 23, 2020 5:32 pm
Location: Harrisburg, Pennsylvania, USA
Has thanked: 32 times
Been thanked: 15 times

3rd valve inconsistency

Post by sdloveless »

Howdy folks!

I have a question about, or problem with, the 3rd valve on my 1240. When playing notes with 3rd valve, such as the Db, C (especially C), and B below the staff, the horn sounds and feels like it has water in it. Even if it definitely does not have any water in it. Those notes are also hard to center and difficult to play at low volume. It's not quite as pronounced with Gb, F or E below those notes. I would not necessarily describe the sound as "stuffy".

Any thoughts? Valve alignment issue? Problem between mouthpiece and chair?


Scott Loveless
Pennsylvania, USA
1939 King 1240, JP179B
"When life knocks you down, stay there and take a nap."
User avatar
Three Valves
Posts: 4565
Joined: Thu Aug 13, 2020 4:07 pm
Location: The Land of Pleasant Living
Has thanked: 799 times
Been thanked: 492 times

Re: 3rd valve inconsistency

Post by Three Valves »

Between the mouthpiece and the chair, I'd try changing the chair first.
Thought Criminal
Mack Brass Artiste
TU422L with TU25
1964 Conn 36k with CB Arnold Jacobs
Accent (By B&S) 952R with Bach12
The Fourth Estate is the Fifth Column
User avatar
bloke
Mid South Music
Posts: 18671
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3677 times
Been thanked: 3946 times

Re: 3rd valve inconsistency

Post by bloke »

Thos is really gross - and I hope this isn’t your problem…or maybe I do, because it’s easy to fix.
There might be some huge disgusting ”schmultz- flap” hanging somewhere in that circuit. I’ve seen it happen before, and with professional players. I controlled my facial expressions in front of them, so they would not see how utterly disgusted I was...
User avatar
sdloveless
Posts: 198
Joined: Sun Aug 23, 2020 5:32 pm
Location: Harrisburg, Pennsylvania, USA
Has thanked: 32 times
Been thanked: 15 times

Re: 3rd valve inconsistency

Post by sdloveless »

bloke wrote: Fri Feb 05, 2021 11:58 am Thos is really gross - and I hope this isn’t your problem…or maybe I do, because it’s easy to fix.
There might be some huge disgusting ”schmultz- flap” hanging somewhere in that circuit. I’ve seen it happen before, and with professional players. I controlled my facial expressions in front of them, so they would not see how utterly disgusted I was...
I will put some effort into cleaning out that circuit. Thank you.
Scott Loveless
Pennsylvania, USA
1939 King 1240, JP179B
"When life knocks you down, stay there and take a nap."
User avatar
sdloveless
Posts: 198
Joined: Sun Aug 23, 2020 5:32 pm
Location: Harrisburg, Pennsylvania, USA
Has thanked: 32 times
Been thanked: 15 times

Re: 3rd valve inconsistency

Post by sdloveless »

Three Valves wrote: Fri Feb 05, 2021 11:54 am Between the mouthpiece and the chair, I'd try changing the chair first.
I've change the mouthpiece and the chair. The only constant is the weak link between them...
Scott Loveless
Pennsylvania, USA
1939 King 1240, JP179B
"When life knocks you down, stay there and take a nap."
User avatar
Three Valves
Posts: 4565
Joined: Thu Aug 13, 2020 4:07 pm
Location: The Land of Pleasant Living
Has thanked: 799 times
Been thanked: 492 times

Re: 3rd valve inconsistency

Post by Three Valves »

Ahhh, in that case, get the schmaltz flap thingy checked out...
Thought Criminal
Mack Brass Artiste
TU422L with TU25
1964 Conn 36k with CB Arnold Jacobs
Accent (By B&S) 952R with Bach12
The Fourth Estate is the Fifth Column
User avatar
UncleBeer
Posts: 515
Joined: Thu Aug 13, 2020 8:37 am
Has thanked: 63 times
Been thanked: 272 times

Re: 3rd valve inconsistency

Post by UncleBeer »

bloke wrote: Fri Feb 05, 2021 11:58 am disgusting ”schmultz- flap”
I refer to 'em as "sea monkeys". :smilie6:
Shawn
Posts: 130
Joined: Mon Aug 17, 2020 12:01 pm
Location: Canada
Has thanked: 0
Been thanked: 1 time

Re: 3rd valve inconsistency

Post by Shawn »

UncleBeer wrote: Fri Feb 05, 2021 12:34 pm
bloke wrote: Fri Feb 05, 2021 11:58 am disgusting ”schmultz- flap”
I refer to 'em as "sea monkeys". :smilie6:
Oh dear.
User avatar
the elephant
Posts: 3321
Joined: Thu Aug 13, 2020 8:39 am
Location: 404 - Not Found
Has thanked: 1861 times
Been thanked: 1297 times

Re: 3rd valve inconsistency

Post by the elephant »

UncleBeer wrote: Fri Feb 05, 2021 12:34 pm
bloke wrote: Fri Feb 05, 2021 11:58 am disgusting ”schmultz- flap”
I refer to 'em as "sea monkeys". :smilie6:
Crook Boogers
Image
User avatar
jonesbrass
Posts: 186
Joined: Tue Aug 25, 2020 6:20 am
Has thanked: 65 times
Been thanked: 27 times

Re: 3rd valve inconsistency

Post by jonesbrass »

the elephant wrote:
UncleBeer wrote: Fri Feb 05, 2021 12:34 pm
bloke wrote: Fri Feb 05, 2021 11:58 am disgusting ”schmultz- flap”
I refer to 'em as "sea monkeys". :smilie6:
Crook Boogers
[emoji2961]
Willson 3050S CC, Willson 3200S F, B&S PT-10, BMB 6/4 CC, Yamaclone JFF-303
Post Reply